Publication

2021

  1. Ryoma Ezaki, Atsushi Mine, Kazuhisa Sato, Ken-ichi Fukui, Keigo Kumada, Masahiro Yumitate, Shintaro Ban, Azusa Yamanaka, Mariko Matsumoto, Bart Van Merbeek, Toshiyuki Hashida, Hirofumi Yatani,Development of dental inspection method:nondestructive evaluation of a dentin-adhesive interface by acoustic emission,  Journal of Prosthodontic Research, In press, https://doi.org/10.2186/jpr.JPR_D_20_00095
  2. Mikio Fukuhara, Tomoyuki Kuroda, Fumihiko Hasegawa, Toshiyuki Hashida, Mitsuhiro Takeda, Kazuya Konno & Nobuhisa Fujima,  AlO6 clusters’ electric storage effect in amorphous alumina supercapacitors, Scientific Reports, 2021, 11(1), 1699, https://doi.org/10.1038/s41598-021-81483-2
  3. Yoku Inoue, Kohei Hayashi, Motoyuki Karita, Takayuki Nakano, Yoshinobu Shimamura, Keiichi Shirasu, Go Yamamoto, Toshiyuki Hashida, Study on the mechanical and electrical properties of twisted CNT yarns fabricated from CNTs with various diameters, Carbon, 2021, 176,  400–410, https://doi.org/10.1016/j.carbon.2021.01.139
  4. Keiichi Shirasu, Shunsuke Kitayama, Fan Liu, Go Yamamoto, Toshiyuki Hashida, Molecular Dynamics Simulations and Theoretical Model for Engineering Tensile Properties of Single-and Multi-Walled Carbon Nanotubes,Nanomaterials, 2021, 11(3),  1–11, 795 https://doi.org/10.3390/nano11030795

2020

  1. Mikio Fukuhara, Tomoyuki Kuroda, Fumihiko Hasegawa, Toshiyuki Hashida, Hotaka Yagyu, Kazuya Konno, Masahiko Nishijima, Eunsang Kwon, Surface analyses of amorphous aluminum oxides with AlO6 clusters, MRS Communications, 2020, 10(4),674–679, https://doi.org/10.1557/mrc.2020.82
  2. Satoshi Watanabe, Shinji Sukino, Taihei Miyasaka, Kazuhisa Sato, Keiji Yashiro, Tatsuya Kawada,  Toshiyuki Hashida, Journal of Materials Science, 2020, 55(20), 8679–8693, https://doi.org/10.1007/s10853-020-04624-4
  3. 吉田尚生,佐藤一永, 桑田直樹,河村 純一, 坂本 正, 橋田 俊之, アコースティックエミッション法を用いたリチウムイオン二次電池用アモルファスシリコン負極の初期劣化損傷評価に関する研究, 材料, 2020, 69(7), 547–554, https://doi.org/10.2472/jsms.69.547
  4. Yuchi Fan, Erhong Song Tufail Mustafa Ruicong Liu Pengpeng Qiu Weiwei Zhou Zhenxing Zhou Akira Kawasaki Keiichi Shirasu Toshiyuki Hashida Jianjun Liu Lianjun Wang Wan Jiang Wei Luo, Liquid‐Phase Assisted Engineering of Highly Strong SiC Composite Reinforced by Multiwalled Carbon Nanotubes, Advanced Science, 2020, 7(21), 2002225,  https://doi.org/10.1002/advs.202002225
  5. Tran Huu Nam,Ken Goto,Yoshinobu Shimamura,Yoku Inoue,Go Yamamoto,Keiichi Shirasu, Toshiyuki Hashida, Effects of high-temperature thermal annealing on properties of aligned multi-walled carbon nanotube sheets and their composites, Composite Interfaces, 2020, 27(6), 569–586, https://doi.org/10.1080/09276440.2019.1670000
  6. Shirasu, K., Miyaura, T., Yamamoto, G., …Naito, K., Hashida, T., Enhanced tribological performance of alumina composites reinforced with acid-treated carbon nanotubes under water lubrication, Diamond and Related Materials, 2020, 101, 107657, https://doi.org/10.1016/j.diamond.2019.107657

2019

  1. Keiichi Shirasu, Itaru Tamaki, Go Yamamoto, Toshiyuki Hashida, Mechanical and thermal expansion properties of aligned carbon nanotube reinforced epoxy composites, Mechanical Engineering Journal, In press, doi.org/10.1299/mej.19-00012
  2. Keiichi Shirasu, Go Yamamoto, Toshiyuki Hashida, How do the mechanical properties of carbon nanotubes increase? An experimental evaluation and modeling of the engineering tensile strength of individual carbon nanotubes, Materials Research Express, In press, https://doi.org/10.1088/2053-1591/ab069f

2018

  1. Keiichi Shirasu, Go Yamamoto, Daniel Nelias，Toshiyuki Hashida, “Mechanical and fracture properties of carbon nanotubes” in Carbon Nanotubes- Recent Progress, edited by Mohammed Rahman, InTech open access publisher, 89–108 (2018). ISBN 978-953-51-5707-6
  2. 金太成，林晏理，二川秀史，白須圭一，山本剛，橋田俊之，細井厚志，川田宏之，「無撚カーボンナノチューブ糸の機械的特性に及ぼす黒鉛化の影響と強度発現機構」，日本機械学会論文集，84(860) (2018) p.17-00585(12pp)．DOI:10.1299/transjsme.17-00585

2017

  1. Keiichi Shirasu, Go Yamamoto, Yoku Inoue, Toshio Ogasawara, Yoshinobu Shimamura, and Toshiyuki Hashida, Development of large-movements and high-force electrothermal bimorph actuators based on aligned carbon nanotube reinforced epoxy composites, Sensors & Actuators A: Physical, 267 (2017) 455-463. [Link]
  2. K. Kumada, K. Sato, and T. Hashida, Evaluation of Mechanical Damages in SOFCs during Start/Stop Operation by Using Acoustic Emission Technique, ECS Transactions,78(1),(2017),2355-2363. 10.1149/07801.2355ecst
  3. S.Watanabe, K.Sato, F.Iguchi, K.Yashiro, T.Hashida, T.Kawada, Mechanical strength evaluation of YSZ, GDC and LSCF under SOFC operating condition, ECS Transactions,78(1),(2017),2181-2190.
  4. Keiichi Shirasu, Takuto Miyaura, Go Yamamoto and Toshiyuki Hashida, Friction and wear properties of carbon nanotube/alumina composites under water lubricated conditions, Proceedings of the 21th International Conference on Composite Materials, (2017).
  5. Keiichi Shirasu, Itaru Tamaki, Takamichi Miyazaki, Go Yamamoto, Raman Bekarevich, Kaori Hirahara, Yoshinobu Shimamura, Yoku Inoue and Toshiyuki Hashida, Key factors limiting carbon nanotube strength: Structural characterization and mechanical properties of multi-walled carbon nanotubes, Mechanical Engineering Journal, 4 (5), (2017) p.17-00029(11pp). http://doi.org/10.1299/mej.17-00029 [Link]
  6. Naoki Yoshida, Tadashi Sakamoto, Naoaki Kuwata, Junichi Kawamura, Kazuhisa Sato and Toshiyuki Hashida, Electrochemical Degradation Caused by Mechanical Damage in Silicon Negative Electrodes, ECS Transactions, Vol.75,No. 20 (2017), pp31-37. [Link]
  7. Kohei Okuyama, Naoki Yoshida, Kazuhisa Sato and Toshiyuki Hashida, Preparation and Electrochemical Evaluation of LiCoO2 Film Prepared with Cold Spraying for Development of Lithium-Ion Battery, ECS Transactions, Vol.75, No.20 (2017), pp.191-199. [Link]
  8. 白須圭一，山本剛，橋田俊之，CNT/エポキシ複合材料を用いた熱バイモルフ，【基礎研究編　ソフトアクチュエータの材料・動力別分類】第5章，実用化に向けたソフトアクチュエータの開発と応用・制御技術，シーエムシー出版 (2017).
  9. 玉木格，白須圭一, 宮崎孝道, 山本剛, Raman Bekarevich, 平原佳織, 島村佳伸, 井上翼, 橋田俊之, 多層カーボンナノチューブの強度・破壊特性評価と構造欠陥の影響に関する研究, 日本機械学会論文集, 83 (847), (2017). DOI:10.1299/transjsme.16-00283 [Link]
  10. Keiichi Shirasu,  Akihiro Nakamura, Go Yamamoto, Toshio Ogasawara, Yoshinobu Shimamura, Yoku Inoue, Toshiyuki Hashida, Potential use of CNTs for production of zero thermal expansion coefficient composite materials: An experimental evaluation of axial thermal expansion coefficient of CNTs using a combination of thermal expansion and uniaxial tensile tests, Composites Part A: Applied Science and Manufacturing, 95 (2017) 152-160. [Link]
  11. Jingxiang Xu, Yuji Higuchi, Nobuki Ozawa,Kazuhisa Sato, Toshiyuki Hashida, Momoji Kubo, Parallel Large-Scale Molecular Dynamics Simulation Opens New Perspective to Clarify the Effect of Porous Structure on Sintering, ACS Applied Materials & Interfaces,(2017).

2016

  1. Keiichi Shirasu, Go Yamamoto, Toshiyuki Hashida, “Application of Aligned Carbon Nanotube-Reinforced Polymer Composite to Electrothermal Actuator” in Carbon Nanotubes- Current Progress of their Polymer Composites, edited by Mohamed R. Berber, InTech open access publisher, DOI: 10.5772/62509 [Link]
  2. Anna Suzuki, Sergei A. Fomin, Vladimir A. Chugunov, Yuichi Niibori, Toshiyuki Hashida, Fractional diffusion modeling of heat transfer in porous and fractured media, International Journal of Heat and Mass Transfer, 102 (2016) 611-618. [Link]
  3. Keiichi Shirasu, Akihiro Nakamura, Go Yamamoto, Toshio Ogasawara, Yoshinobu Shimamura, Yoku Inoue and Toshiyuki Hashida, Preparation and Performance Evaluation of Electrothermal Actuators using Aligned Carbon Nanotube Reinforced Epoxy Composites, Mechanical Engineering Journal, 3(4) (2016), DOI:10.1299/mej.15-00607 [Link]
  4. Hirofumi Sumi, Hiroyuki Shimada, Kazuhisa Sato, Toshiyuki Hashida, Estimation of micro-size defects in electrolyte thin-film by X-ray stress measurement for anode-supported solid oxide fuel cells, Mechanical Engineering Journal, Mechanical Engineering Journal, 3(6) (2016), DOI:10.1299/mej.16-00177 [Link]
  5. Weiwei Zhou, Go Yamamoto, Yuchi Fan, Hansang Kwon, Toshiyuki Hashida and Akira Kawasaki, In-situ characterization of interfacial shear strength in multi-walled carbon nanotube reinforced aluminum matrix composites, Carbon, 106 (2016) 37-47. [Link]
  6. Anna Suzuki, Toshiyuki Hashida, Kewen Li, Roland N. Horn, Experimental tests of truncated diffusion in fault damage zones, Water Resources Research, 52 (2016) DOI: 10.1002/2016WR019017 [Link]
  7. 白須 圭一，中村 彰宏，山本 剛，小笠原 俊夫,島村 佳伸，井上 翼，橋田 俊之，多層カーボンナノチューブにおける軸方向線膨張係数の温度依存性に関する研究（配向カーボンナノチューブ/エポキシ複合材料の線膨張測定に基づく手法），日本機械学会論文集，82(844) (2016)，Article No. 16-00228. DOI: 10.1299/transjsme.16-00228  [Link]
  8. Keigo Kumada, Kazuhisa Sato and Toshiyuki Hashida, Investigation of Mechanical Damage of SOFC caused by Electrochemical Oxidation Using In-Situ Acoustic Emission and Electrochemical Technique, Proceedings of the 16th International Conference on Nanotechnology (August 22nd, Sendai, Japan), (2016), pp. 970-973.  [Link]
  9. Naoki Yoshida, Tadashi Sakamoto, Naoaki Kuwata, Junichi Kawamura, Kazuhisa Sato and Toshiyuki Hashida, In situ evaluation of mechanical and electrochemical degradation in silicon negative electrode for lithium-ion secondary batteries, Proceedings of the 16th International Conference on Nanotechnology(August 22nd, Sendai, Japan), (2016), pp. 974-977. [Link]

2015

  1. 蒔田 浩士, 鈴木 杏奈, 岩垣 巧, 新堀 雄一, 橋田 俊之, 非整数階微分を含む移流分散方程式を用いたトレーサー解析によるき裂構造推定に関する研究, Journal of MMIJ, 131(1) (2015), 1-8. [Link]
  2. Anna Suzuki, Yuichi Niibori, Sergei A. Fomin, Vladimir A. Chugunov, and Toshiyuki Hashida, Fractional derivative-based tracer analysis method for the characterization of mass transport in fractured geothermal reservoirs, Geothermics,53,(2015),125-132. [Link]
  3. Zhonglie An, Liang He, Masaya Toda, Go Yamamoto, Toshiyuki Hashida and Takahito Ono, Microstructuring of carbon nanotubes-nickel nanocomposite, Nanotechnology 26 (2015) 195601 (8pp). [Link]
  4. Anna Suzuki, Yuichi Niibori, Sergei Fomin, Vladimir Chugunov, Toshiyuki Hashida, Prediction of reinejction effects in fault-related subsidiary structures by using fractional derivative-based mathematical models for sustainable design of geothermal reservoirs, Geothermics 57 (2015) 196-204.
  5. Keiichi Shirasu, Go Yamamoto, Yo Nozaka, Weili Wang and Toshiyuki Hashida, Relationship between microstructure and mechanical properties in acid-treated carbon nanotube-reinforced alumina composites, Journal of Materials Science, 50, (2015) 6688-6699. [Link]
  6. Weili Wang, Go Yamamoto, Keiichi Shirasu, Yo Nozaka, Toshiyuki Hashida, Effects of processing conditions on microstructure, electrical conductivity and mechanical properties of MWCNT/alumina composites prepared by flocculation, Journal of the European Ceramic Society, 35, (2015) 3903-3908. [Link]
  7. Keiichi Shirasu, Go Yamamoto, Itaru Tamaki, Toshio Ogasawara, Yoshinobu Shimamura, Yoku Inoue and Toshiyuki Hashida, Negative axial thermal expansion coefficient of carbon nanotubes: Experimental determination based on measurements of coefficient of thermal expansion for aligned carbon nanotube reinforced epoxy composites, Carbon, 95, (2015) 904-909. [Link]
  8. N. Azeggagh, L. Joly-Pottuz, D. Nélias, J. Chevalier, M. Omori, T. Hashida, Hertzian contact damage in silicon nitride ceramics with different porosity contents, Journal of the European Ceramic Society, 35, (2015) 2269-2276. [Link]
  9. N. Azeggagh, L. Joly-Pottuz, J. Chevalier, M. Omori, T. Hashida and D. Nélias, Indentation strength of silicon nitride ceramics processed by spark plasma sintering technique, Materials Science and Engineering A, 644, (2015) 159-170. [Link]

2014

  1. 山本剛，白須圭一，野坂陽，Weili Wang，橋田俊之，”CNT/セラミックス複合材料の研究・開発動向”，カーボンナノチューブ・グラフェン分散技術の工業化と機能展開 – 溶液・ポリマー・金属・セラミックスへの分散 –，S&T出版株式会社，(2014)，pp. 60-67.
  2. Go Yamamoto, Keiichi Shirasu, Yo Nozaka, Yoshinori Sato, Toshiyuki Takagi, Toshiyuki Hashida , “Structure–property relationships in thermally-annealed multi-walled carbon nanotubes”, Carbon, 66, (2014), pp. 219-226.[PDF]
  3. Anna Suzuki, Yuichi Niibori, Sergei A Fomin, Vladimir A Chugunov, and Toshiyuki Hashida,  “Characterization of Mass / Heat Transfer in Fractured Geothermal Reservoirs Using Mathematical Model of Complex Dynamical System,” Proc. Thirty-Ninth Workshop on Geothermal Reservoir Engineering，Stanford , 39, (2014), pp. 1–9.[PDF]
  4. Anna Suzuki, Yuichi Niibori, Sergei a. Fomin, Vladimir a. Chugunov, and Toshiyuki Hashida, “Analysis of Water Injection in Fractured Reservoirs Using a Fractional-Derivative-Based Mass and Heat Transfer Model,” Mathematical Geosciences, doi: 10.1007/s11004-014-9522-5, (2014).[PDF]
  5. Yoshinobu Shimamura, Kahori Oshima, Keiichiro Tohgo, Tomoyuki Fujii, Keiichi Shirasu, Go Yamamoto, Toshiyuki Hashida, Ken Goto, Toshio Ogasawara, Kimiyoshi Naito, Takayuki Nakano, Yoku Inoue, Tensile mechanical properties of carbon nanotube/epoxy composite fabricated by pultrusion of carbon nanotube spun yarn preform, Composites Part A, Volume 62, July 2014, Pages 32-38. [PDF]
  6. Yo Nozaka, Weili Wang, Keiichi Shirasu, Go Yamamoto, Toshiyuki Hashida, Inclined slit-based pullout method for determining interfacial strength of multi-walled carbon nanotube–alumina composites. Carbon 78 (2014) 439–445. [PDF]
  7. Go Yamamoto, Keiichi Shirasu, Yo Nozaka, Weili Wang, Toshiyuki Hashida, Microstructure–property relationships in pressureless-sintered carbon nanotube/alumina composites, Materials Science & Engineering A 617, 3 (2014) 179–186. [PDF]
  8. Yani Jing, Zhenzi Jing, Jonathan Willis-Richards, Toshiyuki Hashida, A simple 3-D thermoelastic model for assessment of the long-term performance of the Hijiori deep geothermal reservoir, Journal of Volcanology and Geothermal Research,269,(2014),14-22. [Link]
  9. Kohei Bushimata, Shin-ichi Ogino, Kazutaka Hirano, Tatsuhiro Yabune, Kenta Sato, Takashi Itoh, Kenichi Motomiya, Koji Yokoyama, Daiki Mabuchi, Hikaru Nishizaka, Go Yamamoto, Toshiyuki Hashida, Kazuyuki Tohji, and Yoshinori Sato, Structural and Electrochemical Characterization of Ethylenediaminated Single-Walled Carbon Nanotubes Prepared from Fluorinated SWCNTs, The Journal of Physical Chemistry C,118,(2014),14958-14956. [Link]
  10. Kazuhisa Sato, and Toshiyuki Hashida, Mechanical Analysis to Improve Reliability and Durability of Solid Oxide Fuel Cells, Materials Science Forum,783-786,(2014),1704-1707. [Link]
  11. Ryota Sakanoi, Tomomi Shimazaki, Jingxiang Xu, Yuji Higuchi, Nobuki Ozawa, Kazuhisa Sato, Toshiyuki Hashida, and Momoji Kubo, Communication: Different behavior of Young’s modulus and fracture strength of CeO2: Density functional theory calculations, The Journal of Chemical Physics,140(121102),(2014),140-143. [Link]
  12. Anna Suzuki, Yuichi Niibori, Sergei A Fomin, Vladimir A Chugunov, and Toshiyuki Hashida, Characterization of Mass / Heat Transfer in Fractured Geothermal Reservoirs Using Mathematical Model of Complex Dynamical System, Proceedings of 39th Stanford Geothermal Workshop, Stanford University, Stanford, California, February 24-26, 2014, SGP-TR-202,(2014),1-9.
  13. G. Yamamoto, K. Shirasu, Y. Nozaka, Y. Shimamura, Y. Inoue, T. Hashida, Fabrication And Mechanical Evaluatuion Of Aligned Multi-Walled Carbon Nanotube Sheet/Alumina Laminated Ceramic Composites, Proceedings of 16TH European Conference On Composite Materials (ECCM16), Seville, Spain, 22-26 June 2014,(2014),in CD ROM.
  14. W.L. Wang, G. Yamamoto, K. Shirasu, Y. Nozaka, T. Hashida, Microstructure and Mechanical Properties of Multi-Walled Carbon Nanotube/Alumina Composites Prepared By A Novel Flocculation Method, Proceedings of 16TH European Conference On Composite Materials (ECCM16), Seville, Spain, 22-26 June 2014,(2014),in CD ROM.

2013

  1. 山本剛, 白須圭一, 橋田俊之, “カーボンナノチューブを利用したセラミックス基複合材料の製造方法”, 【エレクトロニクス用途における】コンポジット材料の混練・コンパウンド技術と分散・界面制御 (技術情報協会), (2013), pp. 658-663.
  2. 白須圭一，山本剛，野坂陽，大森守，橋田俊之，”カーボンナノチューブ/アルミナ複合材料の破壊特性に及ぼすカーボンナノチューブのアニール処理の影響”，日本機械学会論文集A編, 79, No. 802, (2013), pp. 706-710. [PDF]
  3. 野坂陽，山本剛，白須圭一，大森守，高木敏行，橋田俊之，”常圧焼成法により作製したカーボンナノチューブ/アルミナ複合材料の機械的特性および微視組織評価に関する研究”，日本機械学会論文集A編, 79, No. 802, (2013), pp. 764-768. [PDF]
  4. Go Yamamoto, Keiichi Shirasu, Yo Nozaka, Takahumi Nakamura and Toshiyuki Hashida, “Development of Pressureless Sintering Method for Carbon Nanotube/Alumina Composites and Their Microstructure-Property Relationships”，Journal of Solid Mechanics and Materials Engineering, 7,  (2013), pp. 394-402.[PDF]
  5. A. Suzuki, R. Horne，H. Makita，Y. Niibori，S. Fomin，V. Chugunov，T. Hashida， ”Development of Fractional Derivative-Based Mass and Heat Transport Model”，Proc. Thirty-Eighth Workshop on Geothermal Reservoir Engineering，Stanford  (2013).[PDF]
  6. 鈴木杏奈, 蒔田浩士, 新堀雄一, 橋田俊之 (2013) “非整数解微分を含む物質移動モデルを用いた坑井間距離の異なるトレーサー応答推定の検証”, 日本地熱学会誌, 35, (2013), pp. 149–161.
  7. Kazushi Sato and Toshiyuki Hashida, Analysis of Confining Pressure Dependency of Apparent Fracture Toughness of Rock Based on Cohesive Crack Model, Proceedings of the 6th International Symposium on In-situ Rock Stress (ISRM Specialized Conference 2013), August 20-22, 2013, Sendai, Japan, in CD ROM,(2013).
  8. Koji Amezawa, Kazuhisa Sato, Toshiyuki Hashida, and Tatsuya Kawada, In Situ Measurements of Mechanical Properties of Materials for Solid Oxide Fuel Cells, Netsu Sokutei,40(1),(2013),23-29.
  9. Liang He, Masaya Toda, Yusuke Kawai, Hidetoshi Miyashita, Mamoru Omori, Toshiyuki Hashida, Rudiger Berger, Takahito Ono, Fabrication of CNT-carbon composite microstructures using Si micromolding and pyrolysis, Microsystem Technologies, 20(2), (2013),201-208. [Link]
  10. Kazuhisa Sato, Satoshi Watanabe, Koji Amezawa, Tatsuya Kawada, Toshiyuki Hashida, Basic Study of Mechanical Properties of SOFC Components for Improvement of Reliability and Durability, Ceramics Japan (Bulletin of the Ceramic Society of Japan),48(3),(2013),159-164.
  11. 佐藤一永, 福井健一, 高藤 淳, 橋田俊之, 水崎純一郎, 完全固体電池開発のための人工知能技術の必要性, 工知能学会誌,28(4),(2013),529-534.
  12. Y. Li, S. Liu, N. Hu, X. Han, L. Zhou, H. Ning, L. Wu, Alamusi, G. Yamamoto, C. Chang, T. Hashida, S. Atobe, H. Fukunaga, Pull-out simulations of a capped carbon nanotube in carbon nanotube-reinforced nanocomposites, Journal of Applied Physics,113(14),(2013),144304-1-144304-7. [Link]
  13. Anna Suzuki, Roland N. Horne, Hiroshi Makita, Yuichi Niibori, Sergei A. Fomin, Vladimir A. Chugunov, and Toshiyuki Hashida, Development of Fractional Derivative-Based Mass and Heat Transport Model, Proceedings of Thirty-Eight Workshop on Geothermal Reservoir Engineering, Stanford University, Stanford, California, February 11-13, SGP-TR-198,(2013),in CD ROM.
  14. Anna Suzuki, Hiroshi Makita, Yuichi Niibori and Toshiyuki Hashida, A Study of Prediction of Tracer Response at Diffrerent Inter-well Distances Using Fractional Advection-Dispersion Equation, Journal of The Geothermal Research Society of Japan,35(4),(2013),149-161.
  15. Jingxiang Xu, Yuji Higuchi, Nobuki Ozawa, Kazuhisa Sato, Toshiyuki Hashida, and Momoji Kubo, Theoretical Study on the Effect of Three-Dimensional Porous Structure on the Sintering of Nickel Nanoparticles in the Ni/YSZ Anode, ECS Transactions,57(1),(2013),2459-2464. [Link]
  16. S. Watanabe, F. Iguchi, K. Sato, K. Yamamoto, T. Hashida, K. Terada, and T. Kawada, Identification of Ni-YSZ Anode Creep Property Using PSO for Multiscale Simulation, ECS Transactions,57(1),(2013),1379-1386. [Link]
  17. K. Sato, T. Miyasaka, S. Watanabe, and T. Hashida, Evaluation of Elastic and Strength Properties of Ni-YSZ Cermets for Solid Oxide Fuel Cells under Redox Cycling, ECS Transactions,57(1),(2013),753-762. [Link]
  18. K. Fukui, K. Sato, T. Hashida, J. Mizusaki and M. Numao, Intelligent Analysis for Evaluating Physical Degradation using Acoustic Emission, ECS Transactions,57(1),(2013),571-580.
  19. Y. Matsuzaki, K. Nakamura, T. Somekawa, K. Fujita, T. Horita, K. Yamaji, H. Kishimoto, M. Yoshikawa, T. Yamamoto, Y. Mugikura, H. Yokokawa, N. Shikazono, K. Eguchi, T. Matsui, S. Watanabe, K. Sato, T. Hashida, T. Kawada, K. Sasaki, S. Taniguchi, Multimodal Assessment of Durability and Reliability of Flattened Tubular SIS Stacks, ECS Transactions,57(1),(2013),325-333. [Link]
  20. Takashi Fujii, Yuichi Suga, Kyuro Sasaki, Toshiyuki Hashida, Toshiyuki Tosha and Shinsuke Nakao, Change in Permeability of Kimachi Sandstone and iidate Granite with Supercritical CO2 Injection, Journal of The Mining and Materials Processing Institute of Japan (Journal of MMIJ),129,(2013),701-706.
  21. 雨澤浩史，佐藤一永，橋田俊之，川田達也, 固体酸化物燃料電池の機械的特性のin situ測定，熱測定, 熱測定,40(1), (2013), 23-29.
  22. 佐藤一永，渡辺　智，雨澤浩史，川田達也，橋田俊之, SOFCの耐久性・信頼性向上のための構成材料の機械的基礎物性研究, セラミックス,48(3), (2013), 159-164.

2012

  1. Go Yamamoto and Toshiyuki Hashida, Carbon Nanotube Reinforced Alumina Composite Materials, Composites and Their Properties,  ISBN: 978-953-51-0711-8. [Link]
  2. Takashi Fujii, Kaori Endo, Satomi Nakagawa, Yoshiyuki Sato, Hiroshi Inomata, Shinsuke Nakao, Toshiyuki Hashida, Water Saturation Dependence on CO2 Sorption Potential of Sandstones, Natural Resources, 3, 48-55 (2012). [PDF]
  3. 山本剛 ，白須圭一，野坂陽，大森守，高木敏行，橋田俊之，カーボンナノチューブ/アルミナ複合材料の機械的特性に及ぼすカーボンナノチューブ表面修飾の影響に関する研究，日本機械学会論文集A編，78，843-854 (2012)． [PDF]
  4. Go Yamamoto, Sen Liu, Ning Hu, Toshiyuki Hashida, Yaolu Liu, Cheng Yan, Prediction of Pull-out Force of Multi-walled Carbon Nanotube (MWCNT) in Sword-in-sheath Mode, Computational Materials Science 60, 7-12 (2012). [PDF]
  5. Yoshinori Sato, Hikaru Nishizaka, Shunichi Sawano, Atsushi Yoshinaka, Kazutaka Hirano, Shinji Hashiguchi, Takayuki Arie, Seiji Akita, Go Yamamoto, Toshiyuki Hashida, Hisamichi Kimura, Kenichi Motomiya, Kazuyuki Tohji, Influence of the structure of the nanotube on the mechanical properties of binder-free multi-walled carbon nanotube solids, Carbon 50, 34-39 (2012). [PDF]
  6. A. Suzuki， H. Makita， Y. Niibori， S. Fomin， V. Chugunov， T.　Hashida,  ”Characterization of Tracer Responses Using Fractional Derivative – Based Mathematical Model and Its Application to Prediction of Mass Transport in Fractured Reservoirs”，GRC Trans.， 37， pp.1391-1396 (2012).
  7. Taihei Miyasaka, Shinji Sukinou, Satoshi Watanabe, Kazuhisa Sato, Tatsuya Kawada, and Toshiyuki Hashida, Effects of Redox Cycling on the Mechanical Properties of Ni-YSZ Cermets for SOFC Anodes as a Function of Porosity, Proceedings of Ninth International Conference on Flow Dynamics, September 19-21, 2012, Sendai, Miyagi, Japan, (2012),(2012),556-557.
  8. Hiroshi Makita, Anna Suzuki, Yuichi Niibori, Toshiyuki Hashida, Characterization of Fluid Flow in Fractured Geothermal Reservoirs based on Fractional Derivative Mathematical Model, Proceedings of Ninth International Conference on Flow Dynamics, September 19-21, 2012, Sendai, Miyagi, Japan, (2012), 664-665,(2012),664-665
  9. S. Hashimoto, H. Watanabe, T. Sakamoto, T. Kawada, K. Yashiro, J. Mizusaki, K. Kumada, D. Changsheng, K. Sato, T. Hashida, The design and development of an evaluation system for redox characteristics of anode supported SOFCs using in-situ acoustic emission and electrochemical technique, Proceedings of the ASME 2012 6th International Conference on Energy Sustainability & 10th Fuel Cell Science, Engineering and Technology Conference, July 23-26, 2012, San Diego, CA, USA, ESFuelCell2012, in CDROM.,(2012)
  10. Kazuo Nakamura, Takaaki Somekawa, Kenjiro Fujita, Kenji Horiuchi, Yoshio Matsuzaki, Satoshi Yamashita, Harumi Yokokawa, Teruhisa Horita, Katsuhiko Yamaji, Haruo Kishimoto, Masahiro Yoshikawa, Tohru Yamamoto, Yoshihiro Mugikura, Satoshi Watanabe, Kazuhisa Sato, Toshiyuki Hashida, Tatsuya Kawada, Nobuhide Kasagi, Naoki Shikazono, Koichi Eguchi, Toshiaki Matsui, Kazunari Sasaki, Yusuke Shiratori, Study on Durability of Flattened Tubular Segmented-in-Series Type SOFC Stacks, 10th European SOFC Forum 2012, 26 – 29 June 2012, Lucerne Switzerland, A1206, (2012), in CDROM.,(2012)
  11. G. Yamamoto, K. Shirasu, Y. Nozaka, T. Takagi, T. Hashida, Measurements of Carbon Nanotube Tensile Strength and Mechanical Properties of Carbon Nantube/Alumina Composites Prepared by Pressureless Sintering, 15TH European Conference on Composite Materials (ECCM 15), Venice, Italy, 24-28, June 2012, (2012), in CDROM.,(2012)
  12. K. Shirasu, G. Yamamoto, Y. Nozaka, M. Omori, T. Hashida, Fabrication and Evaluation of Carbon Nanotube/Alumina Composites By Precursor Method, 15TH European Conference on Composite Materials (ECCM 15), Venice, Italy, 24-28, June 2012, (2012), in CDROM.,(2012)
  13. Changsheng Ding, Kazuhisa Sato, Junichiro Mizusaki, Toshiyuki Hashida, A comparative study of NiO–Ce0.9Gd0.1O1.95 nanocomposite powders synthesized by hydroxide and oxalate co-precipitation methods, Ceramic International,38,(2012),85-92. [Link]
  14. Satoshi Watanabe, Kazuhisa Sato, Shinji Sukinou, Fumitada Iguchi, Keiji Yashiro, Koji Amezawa, Hiroo Yugami, Toshiyuki Hashida, Junichiro Mizusaki and Tatsuya Kawada, Mechanical Properties of Ni-YSZ Cermet Anode under SOFC Operating Condition by Using In-Situ Mechanical Testing Method, Transactions of the Japan Society of Mechanical Engineers A,78(787),(2012),349-360.

2011

  1. Yoshinori Sato, Hikaru Nishizaka, Kenichi Motomiya, Go Yamamoto, Akira Okubo, Hisamichi Kimura, Mikio Ishikuro, Kazuaki Wagatsuma, Toshiyuki Hashida, Kazuyuki Tohji, Boron-Assisted Transformation to Rod-Like Graphitic Carbons from Multi-Walled Carbon Nanotubes in Boron-Mixed Multi-Walled Carbon Nanotube Solids, ACS Applied Materials and Interfaces 3, 2431-2439 (2011). [PDF]
  2. Sen Liu, Ning Hu, Go Yamamoto, Yindi Cai, Yajun Zhang, Yaolu Liu, Yuan Li, Toshiyuki Hashida, Hisao Fukunaga, Investigation on CNT/alumina interface properties using molecular mechanics simulations, Carbon 49, 3701-3704 (2011). [PDF]
  3. 白須圭一，山本剛，高木敏行，橋田俊之 ，カーボンナノチューブ/アルミナ複合材料の作製と破壊機構の解明に関する研究，日本機械学会論文集A編，77，1041-1045 (2011)． [PDF]
  4. 白須圭一，山本剛，大森守，相沢養市，橋田俊之，カーボンナノチューブ/アルミナ複合材料の強度特性に及ぼすカーボンナノチューブ表面修飾の影響と破壊過程に関する研究，日本機械学会論文集A編，77, 774 (2011). [PDF]
  5. 山本剛 ，白須圭一，高木敏行，橋田俊之，単繊維引抜き試験によるカーボンナノチューブ/アルミな複合材料のクラックブリッジング挙動特性評価，日本機械学会論文集A編，77，779-783 (2011)． [PDF]
  6. 渡辺 智，佐藤一永，武山陽平，井口史匡，八代圭司，雨澤浩史，湯上浩雄，橋田俊之，水崎純一郎，川田達也, 高温・酸化/還元環境下における機械的特性評価法の開発, 日本機械学会論文集Ａ編,77(780),(2011),1357-1366.
  7. H. Yokokawa, H. Kishimoto, K. Yamaji, T. Horita, T. Watanabe, T. Yamamoto, K. Eguchi, T. Matsui, K. Sasaki, Y. Shiratori, T. Kawada, K. Sato, T. Hashida, A. Unemoto, T. Kabata, and K. Tomida, Cooperative Investigations on Degradation of Cathode Materials in Segment-In-Series Cells by MHI, ECS Transactions,35(1),(2011),2191-2200.
  8. K. Sato, T. Sakamoto, A. Kaimai, K. Yashiro, K. Amezawa, T. Hashida, J. Miuzusaki, and T. Kawada, In situ Observation of the Deformation and Mechanical Damage of SOFC Cell/Stack, ECS Transactions,35(1),(2011),225-229.
  9. S. Sukino, S. Watanabe, K. Sato, T. Kawada, J. Miuzusaki, and T. Hashida, Effect of Redox Cycling on Mechanical Properties of Ni-YSZ Cermets for SOFC Anodes, ECS Transactions,35(1),(2011),1473-1482.
  10. K. Terada, T. Kawada, K. Sato, F. Iguchi, K. Yashiro, K. Amezawa, M. Kubo, H. Yugami, T. Hashida, J. Miuzusaki, H. Watanabe, H. Aoyagi, and K. Takahashi, Multiscale Simulation of Electro-Chemo-Mechanical Coupling Behavior of PEN Structure under SOFC Operation, ECS Transactions,35(1),(2011),923-933.
  11. Y. Kimura, T. Kushi, S. Hashimoto, S. Watanabe, K. Amezawa, T. Kawada, Y. Fukuda, A. Unemoto, K. Sato, K. Yashiro, J. Miuzusaki, and T. Hashida, Mechanical Properties of La0.6Sr0.4Co1-yFeyO3-δ under Various Temperatures and Oxygen Partial Pressures, ECS Transactions,35(1),(2011),2429-2434.
  12. Kazuhisa Sato, Ken Suzuki, Ryo Narumi, Keiji Yashiro, Toshiyuki Hashida, and Junichiro Mizusaki, Ionic Conductivity in Uniaxial Micro Strain/Stress Fields of Yttria Stabilized Zirconia, Japanese Journal of Applied Physics,50,(2011),055803-1-055803-5.
  13. Changsheng Ding, Hongfei Lin, Kazuhisa Sato, Toshiyuki Hashida, Co-precipitation synthesis and characterization of NiO-Ce0.8Sm0.2O1.9 nanocomposite powders: Effect of precipitation agents, Journal of Nanoscience and Nanotechnology,11,(2011),2336-2343.
  14. Changsheng Ding, Hongfei Lin, Kazuhisa Sato, Toshiyuki Hashida, Simple and rapid preparation of Ce0.9Gd0.1O1.95 electrolyte films for anode-supported solid oxide fuel cells, Surface and Coatings Technology,205,(2011),2813-2817.
  15. Changsheng Ding, Toshiyuki Hashida, Synthesis and evaluation of NiO-Ce0.8Sm0.2O1.9 nanocomposite powders for low-temperature solid oxide fuel cells, International Journal of Hydrogen Energy,36,(2011),5567-5573.
  16. Changsheng Ding, Hongfei Lin, Kazuhisa Sato, Toshiyuki Hashida, Synthesis of La0.8Sr0.2Co0.8Fe0.2O3 Nanopowders and Their Application in Solid Oxide Fuel Cells, Journal of fuel cell science and technology,8,(2011),051016-1-051016-4.
  17. Changsheng Ding, Hongfei Lin, Kazuhisa Sato, and Toshiyuki Hashida, Synthesis of La0.8Sr0.2Co0.8Fe0.2O3 Nanopowders and Their Application in Solid Oxide Fuel Cells, Materials Science and Engineering (IOP Conference Series),18,(2011),132002-1-132002-14.
  18. Sergei A. Fomin, Vladimir A. Chugunov, and Toshiyuki Hashida, Non-Fickian mass transport in fractured porous media, Advances in Water Resources,34,(2011),205-214.
  19. Go Yamamoto, Keiichi Shirasu, Toshiyuki Hashida, Toshiyuki Takagi, Ji Won Suk, Jinho An, Richard D. Piner, Rodney S. Ruoff, Nanotube fracture during the failure of carbon nanotube/alumina composites, Carbon,49,(2011),3709-3716.
  20. Sergei Fomin, Vladimir Chugunov and Toshiyuki Hashida, Mathematical Modeling of Anomalous Diffusion in Porous Media, Fractional Differential Calculus,1(1),(2011),1-28.
  21. Masaya Toda, Takashi Fujii, Atsushi Yoshida, Toshiyuki Hashida, Takahito Ono, Measurements of the Phase Transition and the Average Length of the Density Fluctuation Under Supercritical Fluid using Micromechanical Resonators, Applied Physics Letters,99(7),(2011),074101-1-074101-3.

2010

  1. Yuan Li, Ning Hu, Go Yamamoto, Zhongchang Wang, Toshiyuki Hashida, Hiroshi Asanuma, Chensong Dong, Tomonaga Okabe, Masahiro Arai, Hisao Fukunaga, Molecular mechanics simulation of the sliding behavior between nested walls in a multi-walled carbon nanotube, Carbon 48, 2934-2940 (2010). [PDF]
  2. 山本剛，大森守，相沢養市，橋田俊之，高木敏行、ナノ界面制御によるカーボンナノチューブ/アルミナ複合材料の作製とその機械的特性評価 （機械的特性に及ぼす焼結助剤の影響評価）、日本機械学会論文集 A編，76巻，764号， (2010), 54-56.     Go Yamamoto, Mamoru Omori, Yoichi Aizawa, Toshiyuki Hashida, and Toshiyuki Takagi, A Novel Structure for Carbon nanotube Reinforced Alumina Composites (Effects of Sintering Additives on the Mechanical Properties), Transactions of the Japan Society of Mechanical Engineers, Vol. 76, No. 764 (2010), 54-56.
  3. Takamasa Onoki, Tomoaki Kuno, Atsushi Nakahira, and Toshiyuki Hashida, Effects of Titanium Surface Treatment on Adhesive Properties of Hydroxyapatite Ceramics Coating to Titanium Substrates by Double Layered Capsule Hydrothermal Hot-Pressing, Journal of the Ceramic Society of Japan, Vol. 118, No. 6] (2010), 530-534.
  4. * Hongfei Lin, Changsheng Ding, Kazuhisa Sato, Yoshifumi Tsutai and Toshiyuki Hashida, Low-Temperature Anode-Supported SOFC with Ultra-Thin Ceria-Based Electrolytes Prepared by Modified Sol-Gel Route, Journal of Solid Mechanics and Materials Engineering, Vol. 4, No.2 (2010), 335-343.
  5. * Changsheng Ding, Hongfei Lin, Kazuhisa Sato, Yoshifumi Tsutai, Mabito Iguchi and Toshiyuki Hashida, Preparation and Characterization of Ce0.9Gd0.1O1.95 Electrolyte Films by Spray Coating Process, Journal of Solid Mechanics and Materials Engineering, Vol. 4, No.2 (2010),325-333
  6. G. Yamamoto, M. Omori, T. Hashida, H. Kimura and T. Takagi, “Effects of Sintering Additive on Mechanical Properties of Alumina Matrix Composites Reinforced with Carbon Nanotubes”, Journal of Solid Mechanics and Materials Engineering, 4 (2010) 460-69.
  7. Sergei Fomin, Vladimir Chugnov, and Toshiyuki Hashida, Application of Fractional Differential Equations for Modeling the Anomalous Diffusion of Contaminant from Fracture into Porous Rock Matrix with Bordering Alteration Zone, Transport in Porous Media (Transp Porous Med), Vol. 81, No. 2 (2010), 187-205.  DOI: 10.1007/s11242-009-9393-2
  8. A. Suzuki， R. Chiba， T. Okaze， Y. Niibori， S. Fomin， V. Chugnov,  T.Hashida,  ”Characterizing Non-Fickian Transport in Fractured Rock Masses Using Fractional Derivative-Based Mathematical Model”，GRC Trans.，34，pp.1179-1184 (2010).
  9. A. Suzuki， R. Chiba， T. Okaze， T. Hashida，”Development of Fractional Derivative　–　Based Mass Transport Model for Evaluation of Complex Crustal Fluid Flow”，Proc. of  2010  Int. Symposium on Renewable Energy 2010，P-Ge-15  (2010).
  10. T. Fujii, H. Lin, Y. Sato, Y. Sugai, K. Sasaki, H. Inomata, and T. Hashida, Investigation of CO2 sorption behavior in rocks for CO2 geological storage, Journal of MMIJ,126(3),(2010),84-94.
  11. Kazuhisa Sato, Keiji Yashiro, Tatsuya Kawada, Hiroo Yugami, Toshiyuki Hashida, Junichiro Mizusaki, Fracture process of nonstoichiometric oxide based solid oxide fuel cell under oxidizing/reducing gradient conditions, Journal of Power Sources,195,(2010),5481-5486.
  12. G. Yamamoto, J. W. Suk, J. An, R. D. Piner, T. Hashida, T. Takagi and R. S. Ruoff, The Influence of Nanoscale Defects on the Fracture of Multi-Walled Carbon Nanotubes under Tensile LoadingThe Influence of Nanoscale Defects on the Fracture of Multi-Walled Carbon Nanotubes under Tensile Loading, Diamond & Related Mater.,19,(2010),748-751.
  13. Satoshi Watanabe, Kazuhisa Sato, Yohei Takeyama, Fumitada Iguchi, Keiji Yashiro, Toshiyuki Hashida, Junichiro Mizusaki, and Tatsuya Kawada, Development of in-situ mechanical testing method for SOFC components, Proceedings of The 8th International Conference on FUEL CELL SCIENCE, ENGINEERING and TECHNOLOGY (FUELCELL2010), June 14-16, 2010, Brooklyn, New York, USA, in CD ROM,(2010).
  14. Changsheng Ding, Hongfei Lin, Kazuhisa Sato, Yoshifumi Tsutai, Mabito Iguchi, Toshiyuki Hashida, Anode-supported SOFCs with Electrolyte Thin Films Prepared by Spray Coating, Materials Science Forum,631-632,(2010),319-324.
  15. Changsheng Ding, Hongfei Lin, Kazuhisa Sato, Toshiyuki Hashida, A simple, rapid spray method for preparing anode-supported solid oxide fuel cells with GDC electrolyte thin films, Journal of Membrane Science,350,(2010),1-4.
  16. Changsheng Ding, Hongfei Lin, Kazuhisa Sato, Toshiyuki Hashida, Improvement of electrochemical performance of anode-supported SOFCs by NiO-Ce0.9Gd0.1O1.95 nanocomposite powders, Solid State Ionics,181,(2010),1238-1243.
  17. Changsheng Ding, Hongfei Lin, Kazuhisa Sato, Koji Amezawa, Tatsuya Kawada, Junichiro Mizusaki, Toshiyuki Hashida, Effect of thickness of Gd0.1Ce0.9O1.95 electrolyte films on electrical performance of anode-supported solid oxide fuel cells, Journal of Power Sources,195,(2010),5487-5492.
  18. Changsheng Ding, Toshiyuki Hashida, High performance anode-supported thin film solid oxide fuel cell with nanostructured cathode, Energy & Environmental Science,3,(2010),1729-1731.
  19. T. Fujii, S. Nakagawa, Y. Sato, H. Inomata, and T. Hashida, CO2 sorption characteristics of rocks and minerals in storing CO2 processes, Natural Resources,1,(2010),1-10.
  20. T. Fujii, S. Nakagawa, Y. Sato, H. Inomata, and T. Hashida, Sorption behavior of CO2 on rocks and minerals in CO2 rich dense phase, Journal of MMIJ,126,(2010),554-559.

2009

  1. Kazuhisa Sato, Ken Suzuki, Toshiyuki Hashida, Hiroo Yugami, Keiji Yashiro, Tatsuya Kawada, Alan Atkinson, and Junichiro Mizusaki, Effect of Y2O3 addition on the conductivity and elastic modulus of (CeO2)1-x(YO1.5)x , Solid State Ionics, Vol. 180, Issues 20-22, (August, 2009) 1220–1225.  doi:10.1016/j.ssi.2009.06.003
  2. Changsheng Ding, Hongfei Lin, Kazuhisa Sato, Yoshifumi Tsutai, Mabito Iguchi and Toshiyuki Hashida, Anode-supported SOFCs with Electrolyte Thin Films Prepared by Spray Coating, Materials Science Forum -Multiscale, Multifunctional and Functionally Graded Materials, Vols. 631-632 (2009) 319-324.
  3. Go Yamamoto, Toshiyuki Hashida, Mamoru Omori, Hisamichi Kimura, Reinforcement of Alumina with Surface Modified Carbon Nanotubes, Materials Science Forum -Multiscale, Multifunctional and Functionally Graded Materials, Vols. 631-632 (2009), 231-238.
  4. Changsheng Ding, Hongfei Lin, Kazuhisa Sato, Yoshifumi Tsutai, Hiromichi Ohtaki, Mabito Iguchi, Chiharu Wada and Toshiyuki Hashida, Preparation of doped ceria electrolyte films for SOFCs by spray coating method, Journal of Dispersion Science and Technology, Vol. 30 (2009), 241-245.
  5. Changsheng Ding, Hongfei Lin, Kazuhisa Sato, and Toshiyuki Hashida, Synthesis of NiO-Ce0.9Gd0.1O1.95 Nanocomposite Powders for Low-Temperature Solid Oxide Fuel Cell Anodes by Co-Precipitation, Scripta Materialis, Vol. 60, (2009), 254-256.
  6. Masaru Namura, Ippei Waki, Yoshinori Sato a, Go Yamamoto, Akira Okubo, Hisamichi Kimura, Naohisa Osaka, Kenichi Motomiya, Toshiyuki Hashida, Balachandran Jeyadevan, Kazuyuki Tohji, Preparation and characterization of lanthanum carbide encapsulated carbon nanocapsule/lanthanum hexaboride nanocomposites, Materials Letters, Vol. 63 (2009), 1307–1310.
  7. Atsushi Nakahira, Hidezumi Nagata, Takamasa Onoki, Yuki Yamasaki, and Toshiyuki Hashida, Synthesis of Dense and Pinhole-free Y-zeolite for Separation Membrane Using a Modified Hydrothermal Method, Chemistry Letters Vol.38, No.6 (2009), 608-609.
  8. Toshiyuki Hashida, Yohei Takeyama, and Kazuhisa Sato, The Effects of Oxygen Vacancy Concentration on the Mechanical Properties of Zirconia and Ceria-Based Electrolytes for SOFCs, Proceedings of The 7th International Conference on Fuel Cell Science, Engineering and Technology -FUELCELL2009, June 8-10, 2009, Newport Beach, California, USA, (2009), in CD-ROM.
  9. Takashi Fujii, Yoshiyuki Sato, Hongfei Lin, Hiroshi Inomata, Toshiyuki Hashida, Evaluation of CO2 sorption capacity of rocks using a gravimetric method for CO2 geological sequestration, Energy Procedia, Volume 1, Issue 1, (February 2009), pp. 3723-3730. (Proceedings of the 9th International Conference on Greenhouse Gas Control Technologies (GHGT-9), November 16 -20 2008, Washington DC, USA, Edited by John Gale, Howard Herzog and Jay Braitsch)
  10. Takashi Fujii, Yuichi Sugai, Kyuro Sasaki, Toshiyuki Hashida, Measurements of CO2 sorption on rocks using a volumetric technique for CO2 geological storage, Energy Procedia, Volume 1, Issue 1, (February 2009), pp. 3715-3722. (Proceedings of the 9th International Conference on Greenhouse Gas Control Technologies (GHGT-9), November 16 -20 2008, Washington DC, USA, Edited by John Gale, Howard Herzog and Jay Braitsch)
  11. Go Yamamoto, Toshiyuki Hashida, Mamoru Omori, Hisamichi Kimura, Preparation and microstructure of carbon nanotube-toughened alumina composites, Journal of Solid Mechanics and Materials Engineering , Vol. 3, (2009) , 85-95.
  12. Toshiyuki Hashida, Kazuhisa Sato, Yohei Takeyama, Tatsuya Kawada and Junichiro Mizusaki, Deformation and Fracture Characteristics of Zirconia and Ceria-Based Electrolytes for SOFCs under Reducing Atmospheres, ECS Transactions, Vol. 25, No. 2, (2009), 1565-1572. (216th Electrochemical Society (ECS) Meeting, October 4-9, 2009, Vienna, Austria, Solid Oxide Fuel Cells 11 (SOFC-XI), Edited by S.C. Singhal and H. Yokokawa)
  13. Takashi Nakamura, Yohei Takeyama, Satoshi Watanabe, Keiji Yashiro, Kazuhisa Sato, Toshiyuki Hashida and Junichiro Mizusaki, Oxygen Nonstoichiometry, Crystal Structure, and Mechanical Properties of La2NiO4+, ECS Transactions, Vol. 25, No. 2, (2009), 2573-2580. (216th Electrochemical Society (ECS) Meeting, October 4-9, 2009, Vienna, Austria, Solid Oxide Fuel Cells 11 (SOFC-XI), Edited by S.C. Singhal and H. Yokokawa)
  14. T. Kawada, S. Watanabe, S. hashimoto, T. Sakamoto, A. Umesawa, M. Kurumatani, K. Sato, F. Iguchi, K. Yashiro, K. Amezawa, K. Terada, M. Kubo, H. Yugami, T. Hashida, and J. Mizusaki, Classification of Mechanical Failures of SOFC and Strategy for Evaluation of the Operational Margins, ECS Transactions, Vol. 25, No. 2, (2009), 467-472. (216th Electrochemical Society (ECS) Meeting, October 4-9, 2009, Vienna, Austria, Solid Oxide Fuel Cells 11 (SOFC-XI), Edited by S.C. Singhal and H. Yokokawa)
  15. G. Yamamoto, T. Hashida, M. Omori and H. Kimura，“Preparation and Microstructure of Carbon Nanotube-Toughened Alumina Composites”, Journal of Solid Mechanics and Materials Engineering, 3 (2009) 85-95.
  16. G. Yamamoto, T. Hashida, M. Omori and H. Kimura, “Reinforcement of Alumina with Surface Modified Carbon Nanotubes”, Materials Science Forum, 631-632 (2009) 231-238.
  17. M. Namura, I. Waki, Y.i Sato, G. Yamamoto, A. Okubo, H. Kimura, N. Osaka, K. Motomiya, T. Hashida, B. Jeyadevan and K. Tohji, “Preparation and Characterization of Lanthanum Carbide Encapsulated Carbon Nanocapsule/Lanthanum Hexaboride Nanocomposites”, Materials Letters, 63 (2009) 1307-10.
  18. M. Omori, T. Watanabe, M. Tanaka, A. Okubo, H. Kimura and T. Hashida, “Nanocomposite Prepared from Carbon Nanotubes and Hydroxyapatite Precursors”, Nano Biomedicine 1[2] (2009) 137-42.
  19. G. Yamamoto, N. Hu, T. Ono, M. Omori, Y. Aizawa, H. Kimura, T. Takagi, and T. Hashida, Design and processing of ceramic matrix composites reinforced with carbon nanotube, International Conference on Computational Design in Engineering (CODE 2009), November 3-6, 2009, Seoul, Korea, , OS132-6, (2009), p.96. (Session: High Performance Fiber Reinforced Cementitious Composites -HPFRC).

2008

  1. * Takamasa Onoki, Kazuyuki Hosoi, Toshiyuki Hashida, YasuhiroTanabe, Tomoaki Watanabe, Eiichi Yasuda, MasahiroYoshimura, Effects of titanium surface modifications on bonding behavior of Hydroxyapatite ceramics and titanium by hydrothermal hot-pressing, Materials Science and Engineering, Vol. C28, No. 2, (2008) 207–212.
  2. * Yoshinori Sato, Makoto Ootsubo, Go Yamamoto, Gregory Van Lier,  Mauricio Terrones, Shinji Hashiguchi, Hisamichi Kimura, Akira Okubo, Kenichi Motomiya, Balachandran Jeyadevan, Toshiyuki Hashida, and Kazuyuki Tohji, Super-Robust, Lightweight, Conducting Carbon Nanotube Blocks Cross-Linked by De-fluorination, ACS Nano, Vol. 2, No. 2 (2008), 348-356.
  3. * 佐藤一永，八代圭司，橋田俊之，川田達也，湯上浩雄，水崎純一郎，固体酸化物燃料電池の損傷に及ぼす化学膨張の影響，日本機械学会論文集（A 編），Vol. 74, No. 737, (2008), 68-74. Kazuhisa Sato, Kenji Yashiro, Toshiyuki Hashida, Tatsuya Kawada, Hiroo Yugami and Junichiro Mizusaki, Effect of Chemically-induced Expansion on Damage of Solid Oxide Fuel Cell, Transactions of the Japan Society of Mechanical Engineers, Vol. 74, No. 737, (2008), 68-74.
  4. * Go Yamamoto, Toshiyuki Hashida, Koshi Adachi, and Toshiyuki Takagi, Tribological Properties of Single-Walled Carbon Nanotube Solids, Journal of Nanoscience and Nanotechnology, Vol. 8, No.5 (2008), 2665-2670.  (http://www.aspbs.com/jnn/)
  5. * Changsheng DING, H. Lin, Kazuhisa SATO, Toshiyuki HASHIDA, Synthesis of Nanometer NiO-Ce0.8Sm0.201.9 Composite Nanopowders for Solid Oxide Fuel Cells, 5th International Workshop on Water Dynamics, (Sendai, Japan, September 25-27, 2007), AIP Conference Proceedings, Vol. 987, (2008), pp. 30-34.
  6. * Changsheng DING, H. Lin, Kazuhisa SATO, Toshiyuki HASHIDA, Synthesis and Characterization of Nanometer La0.8Sr0.2Co0.8Fe0.2O3 Nanoparticles for Intermediate-Low Temperature Solid Oxide Fuel Cells, 5th International Workshop on Water Dynamics, (Sendai, Japan, September 25-27, 2007), AIP Conference Proceedings, Vol. 987, (2008), pp. 35-38.
  7. * H. Lin, C. Ding, K. Kumada, K. Sato, Y. Tsutai, C. Wada, and T. Hashida, Ni-GDC Anode-Supported Ceria Electrolyte Film and Its Application in Solid Oxide Fule Cells, 5th International Workshop on Water Dynamics, (Sendai, Japan, September 25-27, 2007), AIP Conference Proceedings, Vol. 987, (2008), pp. 54-57.
  8. *  Y. Oke, N. Yamasaki, N. Maeta, H. Fujimaki and T. Hashida, Further Development of Selective Dyeing Method for Detecting Chrysotile Asbestos in Building Materials, 5th International Workshop on Water Dynamics, (Sendai, Japan, September 25-27, 2007), AIP Conference Proceedings, Vol. 987, (2008), pp. 58-61.
  9. * H. Yamaguchi, K. Sakaguchi, K. Sato, K. Matsuki, and T. Hashida, Possibility of Shear Type Fracture in Visco-plastic Material Under Confining Pressures, 5th International Workshop on Water Dynamics, (Sendai, Japan, September 25-27, 2007), AIP Conference Proceedings, Vol. 987, (2008), pp. 79-82.
  10. * G. Yamamoto, M. Omori, and T. Hashida, Preparation of Carbon Nanotube-Toughened Al2O3 Composite Using Water as a Dispersing Medium, 5th International Workshop on Water Dynamics, (Sendai, Japan, September 25-27, 2007), AIP Conference Proceedings, Vol. 987, (2008), pp. 83-85.
  11. * H. Lin, C. Ding, K. Kumada, K. Sato, Y. Tsutai, C. Wada and T. Hashida, Application of AE Technique in Performance Evaluation of Anode-supported Ceria Electrolyte Thin Film-based SOFCs, 5th International Workshop on Water Dynamics, (Sendai, Japan, September 25-27, 2007), AIP Conference Proceedings, Vol. 987, (2008), pp. 163-166.
  12. * Kenta Sasaki, Takashi Fujii, Yuichi Niibori, Takatoshi Ito, Toshiyuki Hashida, Numerical Simulation of Supercritical CO2 Injection into Subsurface Rock Masses, Energy Conversion & Management, Vol. 49, No.1 (2008), 54-61.
  13. *  Hongfei Lin, Takashi Fujii, Reisuke Takisawa, Toru Takahashi and Toshiyuki Hashida, Experimental evaluation of interactions in supercritical CO2/water/rock minerals system under geologic CO2 sequestration conditions, J. Mater. Sci., Vol. 43, No. 7 (2008), 2307-2315..
  14. * Zhenzi Jing, F. Jin, T. Hashida, N. Yamasaki and Emile H. Ishida, Influence of tobermorite formation on mechanical properties of hydrothermally solidified blast furnace slag, J. Mater. Sci., Vol. 43, No. 7 (2008),2356-2361.
  15. * Ryuichi Chiba, Takashi Okaze, Sergei Fomin, Vladimir Chugunov, Yuichi Niibori, Hisao Fukunaga, and Toshiyuki Hashida,　Numerical Simulations of the Anomalous Solute Transport in a Fractured Porous Aquifer, Geothermal Resources Council Transactions, Vol.32, (2008), pp.441-443.
  16. * S. Fomin, V. Chugnov, and Toshiyuki Hashida, Mathematical Modeling of Non-Fickian Diffusion in Complex Media: From Microscale to Mesoscale and Macroscale, Proc. of I2th International Workshop on New Approaches to HIGH.TECH., Nano-Design, Technology, Computer Simulations (NDTCS ’08), (June 23-27, 2008, Minsk, Belarus), (2008), 199-203.
  17. * S. Fomin, V. Chugnov, and Toshiyuki Hashida, Derivation of Fractional Differential Equations for Modeling Diffusion in Porous Media of Fractal Geometry, Proceedings of IMECE2008: ASME International Mechanical Engineering Congress, (October 31-November 6, 2008, Boston, MA, USA), (2008), 1-5.
  18. * Yoshihiko Oke, Nakamichi Yamasaki,　Go Yamamoto,　Kazuhiro Sasaki,　Naomi Maeta,　Hirokazu Fujimaki,　Hashida, Toshiyuki, Novel selective dyeing method for chrysotile asbestos detection in concrete materials, Environmental Science & Technology (Environ. Sci. Technol.), Vol. 42, No. 5  (2008, 1/26), 1638-1642.   DOI: 10.1021/es071805a
  19. G. Yamamoto, M. Omori, K. Yokomizo, and T. Hashida, Mechanical Properties and Structural Characterization of Carbon Nanotube/Alumina Composites Prepared by Precursor Method, Diamond and Related Materials, Vol 17, Nos. 7-10, (July, 2008), 1554-1557.
  20. Ning Hu, Zen Masuda, Cheng Yan, Go Yamamoto, Hisao Fukunaga1 and Toshiyuki Hashida, The electrical properties of polymer nanocomposites with carbon nanotube fillers , Nanotechnology, Vol. 19, No. 21, (May, 2008), 215701-215710. doi:10.1088/0957-4484/19/21/215701
  21. Ning Hu, Zen Masuda, Go Yamamoto, Hisao Fukunaga, Toshiyuki Hashida, Jinghao Qiu, Effect of fabrication process on electrical properties of polymer/multi-wall carbon nanotube nanocomposites, Composites: Part A, Applied Science and Manufacturing, Vol. 39, No. 5, (May, 2008), 893-903.
  22. Hongfei Lin, Changsheng Ding, Kazuhisa Sato, Yoshifumi Tsutai, Hiromichi Ohtaki, Mabito Iguchi, Chiharu Wada and Toshiyuki Hashida，Preparation of SDC electrolyte thin films on dense and porous substrates by modified sol–gel route, Materials Science and Engineering B, 148 (2008) 73-76.
  23. Go Yamamoto, Mamoru Omori, Kenji Yokomizo, Toshiyuki Hashida, Koshi Adachi, Structural characterization and frictional properties of carbon nanotube/alumina composites prepared by precursor method, Materials Science and Engineering B, Vol. 148, (2008), 265–269.
  24. Hiroo Yugami, Fumitada Iguchi, Kazuhisa Sato and Toshiyuki Hashida, Mechanical Properties of Ceria Based Oxygen Ionic Conductors for SOFC, Proceedings of Sixth International Fuel Cell Science, Engineering and Technology Conference (FuelCell2008), June 16-18, 2008, Denver, Colorado, USA, FuelCell2008-65206 (2008), in CD-ROM.
  25. G. Yamamoto, M. Omori, T. Hashida and H. Kimura,, A Novel Structure for Carbon Nanotube Reinforced Alumina Composites with Improved Mechanical Properties, Nanotechnology, 19, (2008), 315708-315714 (7pp).

2007

  1. * Yuko Suto, Lihui Liu, Nakamichi Yamasaki and Toshiyuki Hashida, Initial behavior of granite in response to injection of CO2-saturated fluid, Applied Geochemistry, Vol. 22, Issue 1 (2007), 202-208.
  2. *M.L. Saucedo-Munoz, T. Hashida, Y. Watanabe, T. Shoji and V.M. Lopez-Hirata, Effect of Precipitation on Cryogenic Toughness in N-Containing Austenitic Stainless Steels, Materials Science Forum, Vols. 539-543, (2007), 4914-4919.
  3. * Yuko Suto, Noriyoshi Tsuchiya, Toshiyuki Hashida, Dissolution and deposition behavior of granite and calc-silicate rock in CO2-saturated hydrothermal system, Proceedings of 12th Water Rock Interaction,  Kunming, China, July 31 -August 5, 2007, Edited by Bullen and Wang, (2007), pp.647-651.
  4. * Toshiyuki Hashida, Ryuichi Chiba, and Sergei Fomin, Modeling of Fluid Flow in Complex Fracture Systems for Sustainable Subsurface Utilization, Proc. of 1st Int. Sympo. on Aqua Science, Water Resource and Innovation Development of Countryside,  (Sakawa, Kochi, Japan, November 26-30, 2007), (2007), pp. 97-102.
  5. * Yoshihiko Oke, Nakamichi Yamasaki, Go Yamamoto, Naomi Maeta, Hirokazu Fujimaki and Toshiyuki Hashida, The development of a novel immersion dyeing method for chrysotile asbestos in building materials, Proc. of 1st Int. Sympo. on Aqua Science, Water Resource and Innovation Development of Countryside,  (Sakawa, Kochi, Japan, November 26-30, 2007), (2007), pp.115-118
  6. * J.Nakanishi, T.Wada, K.Yokosawa, T.Kori, N.Yamasaki, T.Hashida, Alteration of asbestos under acidic hydrothermal conditions, Proc. of 1st Int. Sympo. on Aqua Science, Water Resource and Innovation Development of Countryside,  (Sakawa, Kochi, Japan, November 26-30, 2007), (2007), pp.255-258
  7. * J.Nakanishi, T.Wada, K.Yokosawa, T.Kori, N.Yamasaki, T.Hashida, Synthesis of kaolinite from chrysotile, Proc. of 1st Int. Sympo. on Aqua Science, Water Resource and Innovation Development of Countryside,  (Sakawa, Kochi, Japan, November 26-30, 2007), (2007), pp.259-261
  8. * Hongfei Lin, Changsheng Ding, Kazuhisa Sato, Yoshifumi Tsutai, Chiharu Wada and Toshiyuki Hashida, Autocombustion synthesis of La0.6Sr0.4Co0.2Fe0.8O3- (LSCF) perovskite nanosized powder via modified sol-gel route, Proc. of 1st Int. Sympo. on Aqua Science, Water Resource and Innovation Development of Countryside,  (Sakawa, Kochi, Japan, November 26-30, 2007), (2007), pp.297-302
  9. * Hongfei LIN, Takashi FUJII, Reisuke TAKISAWA and Toshiyuki HASHIDA, Laboratory Study of CO2 Trapping Behavior in Supercritical CO2 /Vapor/Granite System for Geological Storage of CO2, Proc. of 1st Int. Sympo. on Aqua Science, Water Resource and Innovation Development of Countryside,  (Sakawa, Kochi, Japan, November 26-30, 2007), (2007), pp.303-308
  10. * Ryuichi Chiba, Sergei Fomin, Vladimir Chugunov, Yuichi Niibori and Toshiyuki Hashida, Numerical Solutions of the Anomalous Contaminant Transport in a Heterogeneous Aquifer, Proc. of 1st Int. Sympo. on Aqua Science, Water Resource and Innovation Development of Countryside,  (Sakawa, Kochi, Japan, November 26-30, 2007), (2007), pp.349-352
  11. * Takamasa Onoki, Atsushi Nakahira and Toshiyuki Hashida, Hydrothermal Treatment on Titanium Metal for Improving Adhesive Properties of Hydroxyapatite Ceramics Coating, Proc. of 1st Int. Sympo. on Aqua Science, Water Resource and Innovation Development of Countryside,  (Sakawa, Kochi, Japan, November 26-30, 2007), (2007), pp.353-356
  12. * Yasuhiro Matsumoto, Yoshihiko Oke, Nakamichi Yamasaki, Toshiyuki Hashida, Synthesis of Magnesite under Hydrothermal Conditions, Proc. of 1st Int. Sympo. on Aqua Science, Water Resource and Innovation Development of Countryside,  (Sakawa, Kochi, Japan, November 26-30, 2007), (2007), pp. 383-388
  13. * Go Yamamoto, Toshiyuki Hashida, Koshi Adachi and Toshiyuki Takagi, Tribological Properties of Single-Walled Carbon Nanotube Solids, Journal of Nanoscience and Nanotechnology, Vol. 8, (2007), 1-6.
  14. * Go Yamamoto, Yoshinori Sato, Toru Takahashi, Mamoru Omori, Kazuyuki Tohji and Toshiyuki Hashida, Mechanical Properties of Single-Walled Carbon Nanotube Solids Prepared by Spark Plasma Sintering, Journal of Solid Mechanics and Materials Engineering, Vol. 1,  (2007), 854-863.
  15. * Go Yamamoto, Kenji Yokomizo, Mamoru Omori, Yoshinori Sato, Balachandran Jeyadevan, Kenichi Motomiya, Toshiyuki Hashida, Toru Takahashi, Akira Okubo and Kazuyuki Tohji, Polycarbosilane-Derived SiC/Single-Walled Carbon Nanotube Nanocomposites, Nanotechnology, Vol. 18, (2007) Art. No. 145614 (5pp).
  16. * Go Yamamoto, Kenji Yokomizo, Yoshinori Sato, Koshi Adachi, Toshiyuki Hashida, Mamoru Omori, Toru Takahashi and Kazuyuki Tohji, “Evaluation of Tribological Properties of Binder-Free Single-Walled Carbon Nanotube Solids for Solid Lubrication Applications”, Proceedings of 4th International Workshop on Water Dynamics, (7-8 Nov. 2006, Sendai, Japan), AIP Conference Proceedings, Vol. 898, (2007) , 130-134.
  17. * Go Yamamoto, Kenji Yokomizo, Mamoru Omori and Toshiyuki Hashida, “Tribological and Strength Properties of Alumina/Multi-Walled Carbon Nanotube Composites”, Proceedings of 4th International Workshop on Water Dynamics, (7-8 Nov. 2006, Sendai, Japan), AIP Conference Proceedings, Vol. 898, (2007) , 154-158.
  18. * Shinichi Ogino, Yoshinori Sato, Go Yamamoto, Kenichiro Sasamori, Hisami Kimura, Toshiyuki Hashida, Kenichi Motomiya, Balachandran Jeyadevan and Kazuyuki Tohji, “Estimation of the Number of Cross-links of Multi-Walled Carbon Nanotube Films Formed by a Dehydration Condensation Reaction”, Proceedings of 4th International Workshop on Water Dynamics, (7-8 Nov. 2006, Sendai, Japan), AIP Conference Proceedings, Vol. 898, (2007) , 175-178.
  19. * H. Lin, T. Fujii, R. Takizawa, and T. Hashida, Investigation of Interactions in a Simulated Geologic CO2/rock Minerals System for CO2 Underground Sequestration, Proceedings of 4th International Workshop on Water Dynamics, (7-8 Nov. 2006, Sendai, Japan), AIP Conference Proceedings, Vol. 898, (2007) , 17-21.
  20. * K. Sasaki, FT. Fujii, Y. Niibori, T. Ito, and T. Hashida, Numerical Simulation of Injection for CO2 Geological Sequestration With a Treatment of CO2 Dissolution into Water, Proceedings of 4th International Workshop on Water Dynamics, (7-8 Nov. 2006, Sendai, Japan), AIP Conference Proceedings, Vol. 898, (2007) , 45-52.
  21. * M. Shirai, R. Chiba, S. Fomin, V. Chugunov, T. Takahashi, Y. Niibori, and T. Hashida, Numerical Model of Fluid Flow Through Heterogeneous Rock for High Level Radioactive Waste Disposal, Proceedings of 4th International Workshop on Water Dynamics, (7-8 Nov. 2006, Sendai, Japan), AIP Conference Proceedings, Vol. 898, (2007) , 57-62.
  22. * R. Chiba, S. Fomin, V. Chugnov, Y. Niibori, and T. Hashida, Numerical Simulation of Non-Fickian Diffusion and Advection in a Fractured Porous Aquifer, Proceedings of 4th International Workshop on Water Dynamics, (7-8 Nov. 2006, Sendai, Japan), AIP Conference Proceedings, Vol. 898, (2007) , 75-78.
  23. * T. Fujii, Y. Sato, H. Lin, K. Sasaki, T. Takahashi, H. Inomata, and T. Hashida, Evaluation of CO2 Sorption Capacity of Granite for CO2 Geological Sequestration, Proceedings of 4th International Workshop on Water Dynamics, (7-8 Nov. 2006, Sendai, Japan), AIP Conference Proceedings, Vol. 898, (2007) , 79-83.
  24. * Go Yamamoto, Toshiyuki Hashida, Koshi Adachi and Toshiyuki Takagi, Tribological Properties of Single-Walled Carbon Nanotube Solids, Proceedings of The Seventh International Symposium on Advanced Fluid Information and The Fourth International Symposium on Transdisciplinary Fluid Integration, (Tohoku University, Sendai, Japan, December 14-15, 2007), (2007), pp.122-125
  25. * K.Sato, N.Imanaka, K.Fukui, M.Numao, S.Kyotani, K.Yashiro, T.Kawada, T.Hashida, J.Mizusaki, Reliability Evaluation of SOFC under Simulated Operating Condition, Electrochemical Society transactions,Vol.7, No. 1 (2007),455-458.
  26. * S. Fomin, V. Chugunov, and T. Hashida, Simulation of contaminant transport in a fractured porous aquifer, Journal of Fluids Engineering –Transactions of the ASME, Vol. 129, Issue: 9, (Sep., 2007),  1157-1163.
  27. * Z Jing, F. Jin, T. Hashida, N. Yamasaki, and E. H. Ishida, Hydrothermal solidification of blast furnace slag by formation of tobermorite, Journal of Material Science, Vol. 42, Issue 19,  (Oct. 2007), 8236-8241.
  28. * J.G. Lin, and T. Hashida, Preparation of hydroxyapatite ceramics by hydrothermal hot-pressing method at 300 degrees C, Journal of Material Science, Vol. 42, Issue 13 , (2007), 5013-5019.
  29. * Zhenzi Jing, Norihisa Matsuoka, Fangming Jin, Toshiyuki Hashida, and Nakamichi Yamasaki, Municipal Incineration Bottom Ash Treatment Using Hydrothermal Solidification, Waste Management, (2007),  Vol. 27, Issue 2, (2007), 287-293.

2006

  1. *　G. Yamamoto, Y. Sato, T. Takahashi, M. Omori, A. Okubo, K. Tohji, and T. Hashida “Mechanical properties of binder-free single-walled carbon nanotube solids” Scripta Materialia, Vol. 54, (2006), 299-303.
  2. * Mamoru Omori, Takamasa Onoki, Toshiyuki Hashida, Akira Okubo Yoshihiro Murakami and Toshiyuki Hashida, Low Temperature Synthesis of Hydroxyapatite from CaHPO4.2H2O and Ca(OH)2 based on Effect of the Spark Plasma System (SPS), Ceramics. International, Vol. 32 (2006), 617-621.
  3. * Z. Jing, N. Matsuoka, N. Yamasaki, K. Suzuki, and Toshiyuki Hashida, Solidification of Coal Fly Ash Using Hydrothermal Processing Method, Journal of Material Science, Vol. 41 (2006), 1579-1584.
  4. * S. Fomin, V. Chugunov and T. Hashida, Assessment of Stimulated Area Growth During High-Pressure Hydraulic Stimulation of Fractured Subsurface Reservoir, Transport in Porous Media, Vol. 63 (2006), 99-125.
  5. *中田隼矢，駒崎慎一，幸野豊，芝清之，香山晃，橋田俊之，SPクリープ試験法による低放射化フェライト鋼のクリープ特性評価，日本金属学会 誌，Vol. 70, No. 2 (2006), 130-133. Toshiya Nakata, Shin-ichi Komazaki, Yutaka Kohno, Kiyoyuki Shiba, Akira Kohyama, and Toshiyuki Hashida, Evaluation of Creep Properties of Reduced Activation Ferritic Steels by Small Punch Creep Test, J. Japan. Inst. Metals, Vol. 70, No. 2 (2006), 130-133.
  6. * G. Yamamoto, Y. Sato, M. Omori, K. Yokomizo, T. Hashida, T. Takahashi, A. Okubo, S. Watanabe and K. Tohji, Route to the Synthesis of Binder-Free SWCNT Solids with Enhanced Mechanical Properties, AIP Conference Proceedings, Vol.832 (2006), pp.425-429. (The Second International Conference on Flow Dynamics, Sendai, Japan, 16-18 November 2005)
  7. * Masa-aki Tanaka, Takamasa Onoki, Mamoru Omori, Akira Okubo and Toshiyuki Hashida, Mechanical Properties of Carbon Nanotubes/Hydroxyapatite Composites Prepared by Spark Plasma Sintering, AIP Conference Proceedings, Vol.832 (2006), pp. pp430-432. (The Second International Conference on Flow Dynamics, Sendai, Japan, 16-18 November 2005)
  8. * Kenta Sasaki, Takashi Fujii and Toshiyuki Hashida, Numerical Simulation of Flow Dynamics for CO2 Injection into Rock Masses, AIP Conference Proceedings, Vol.832 (2006), pp.433-438. (The Second International Conference on Flow Dynamics, Sendai, Japan, 16-18 November 2005)
  9. * Takamasa Onoki, Hiro Takahashi, Toshinari Kori, Nakamishi Yamasaki and Toshiyuki Hashida, Effects of NaOH Concentration on CO2 Reduction via Hydrothermal Water, AIP Conference Proceedings, Vol.833 (2006), pp. 61-64.  (3rd International Workshop on Water Dynamics, Sendai, Japan, 16-17 November 2005)
  10. * Masa-aki Tanaka, Takamasa Onoki, Kazuyuki Hosoi and Toshiyuki Hashida, Effects of Pressure and Reaction Time on Bonding of Hydroxyapatite Ceramics and Titanium by Hydrothermal Hot-pressing, AIP Conference Proceedings, Vol.833 (2006), pp.82-84. (3rd International Workshop on Water Dynamics, Sendai, Japan, 16-17 November 2005)
  11. * G. Yamamoto, K. Yokomizo, M. Omori, Y. Sato, T. Takahashi, T. Hashida, K. Motomiya, A. Okubo, S. Watanabe and K. Tohji, Synthesis and Characterization of Single-Walled Carbon Nanotube/Silicon Carbide Composites, AIP Conference Proceedings, Vol.833 (2006), pp. 94-99. (3rd International Workshop on Water Dynamics, Sendai, Japan, 16-17 November 2005)
  12. * Takamasa Onoki, Kazuyuki Hosoi and Toshiyuki Hashida, Effects of Water Location in Starting Materials on Bonding Behavior of Hydroxyapatite and Titanium via Hydrothermal Hot-pressing, AIP Conference Proceedings, Vol.833 (2006), pp. 112-115. (3rd International Workshop on Water Dynamics, Sendai, Japan, 16-17 November 2005)
  13. * Ryuichi Chiba, Sergei Fomin, Vladimir Chugunov, Toru Takahashi, Yuichi Niibori and Toshiyuki Hashida, Numerical Simulation for Non-Fickian Diffusion into Fractured Porous Rock, AIP Conference Proceedings, Vol.833 (2006), pp. 133-139. (3rd International Workshop on Water Dynamics, Sendai, Japan, 16-17 November 2005)
  14. * Kazuhisa Sato, Hajime Omura, Toshiyuki Hashida, Keiji Yashiro, Tatsuya Kawada, Junichiro Mizusaki, Hiroo Yugami, Tracking the onset of Damage Mechanism in Ceria-based Solid Oxide Fuel Cells under Simulated Operating Conditions, Journal of Testing and Evaluation, Vol. 34, No. 3 (2006), 246-250.
  15. * Go Yamamoto, Yoshinori Sato, Toru Takahashi, Mamoru Omori, Toshiyuki Hashida, Akira Okubo, and Kazuyuki Tohji, Single-walled Carbon nanotube-derived Novel Structural Material, J. Mater. Res., Vol. 21, No. 6 (2006), 1537-1542.
  16. * Z. Jing, N. Matsuoka, F. Jin, N. Yamasaki, K. Suzuki, and T. Hashida, Solidification of Coal Fly Ash Using Hydrothermal Processing Method, J. Mater. Sci., Vol. 41 (2006), 1579-1584.
  17. * Takamasa Onoki and Toshiyuki Hashida, Novel Method for Hydroxyapatite Coating by Hydrothermal Hot-Pressing via Double Layered Capsule, Key Engineering Materials, Vols. 309-311 (2006), 647-650.
  18. * Takamasa Onoki and Toshiyuki Hashida, New Method for Hydroxyapatite Coating of Titanium by the Hydrothermal Hot Isostatic Pressing Technique, Surface & Coatings Technology, Vol. 200 (2006), 6801-6807.
  19. * Kazuhisa Sato, Toshiyuki Hashida, Hiroo Yugami, Keiji Yashiro, Tatsuya Kawada, Junichiro Mizusaki, characterization of Damage and Fracture Process of Solid oxide Fuel Cells Under Simulated Operating Conditions by Using AE Method, Progress in Acoustic Emission XIII, The Japanese Society for NDI, (2006), 269-276.
  20. * Kazushi Sato and Toshiyuki Hashida, Cohesive Crack Analysis of Toughness Increase Due to Confining Pressure, Pure and Applied Geophysics Vol. 163 No. 5-6 (2006), 1059-1072.
  21. * Kazushi Sato and Toshiyuki Hashida, Fracture Toughness Evaluation Based on Tension-softening Model and its Application to Hydraulic Fracturing, Pure and Applied Geophysics Vol. 163 No. 5-6 (2006), 1073-1090.
  22. * Zhenzi Jing, Emile Hideaki Ishida, Fangming Jin, Toshiyuki Hashida, and Nakamichi Yamasaki, Influence of Quartz Particle Size on Hydrothermal Solidification of Blast Furnace Slag, Ind. Eng. Chem. Res., Vol. 45 (2006), 7470-7474.
  23. * Shin-ichi Ogino, Yoshinori Sato, Go Yamamoto, Kenichiro Sasamori, Hisamichi Kimura, Toshiyuki Hashida, Kenichi Motomiya,  Balachandran Jeyadevan,  and Kazuyuki Tohji, Relation of the Number of Cross-Links and Mechanical Properties of Multi-Walled Carbon Nanotube Films Formed by a Dehydration Condensation Reaction, J. Phys. Chem. B, Vol. 110, No. 46 (2006), 23159-23163. (Journal’s full name= The Journal of Physical Chemistry B)
  24. *佐藤一志，橋田俊之，結合力モデルに基づく岩石の線形破壊力学パラメータの封圧依存性に関する研究，材料, Vol. 55, No. 12, (2006), 1067-1072. Kazushi Sato and Toshiyuki Hashida, Confining Pressure Dependency of LEFM Parameter in Rock Based on Cohosive Crack Analysis, Journal of the Society of Materials Science, Vol. 55, No. 12, (2006), 1067-1072.
  25. * Jun-Guo Li and Toshiyuki Hashida, In situ Formation of Hydroxyapatite-Whisker Ceramics by Hydrothermal Hot-Pressing Method, J. Am. Ceram. Soc., Vol. 89, No. 11 (2006), 3544-3546.
  26. * Kazuhisa Sato, Toshiyuki Hashida, Hiroo Yugami, Kenji Yashiro, Tatsuya Kawada, Junichiro Mizusaki, Characteristics of Damage and Fracture Process of Solid Oxide Fuel Cells Under Simulated Operating Conditions By Using AE Method, Journal of Acoustic Emission, Vol.24, (2006), 215-221.
  27. * Y. Sato, M. Ohtsubo, B. Jeyadevan, K. Tohji, K. Motomiya, R. Hatakeyama, G. Yamamoto, M. Omori, T. Hashida, K. Tamura, T. Akasaka, M. Uo, A. Yokoyama, F. Watari, X-ray absorption fine structure (XAFS) analyses of Ni species trapped in graphene sheet of carbon nanofibers, Physical Review,B (73),(2006),144103-1-144103-11.
  28. * K. Sato, R.Narumi, K.Yashiro, T.Kawada, H.Yugami, T.Hashida, and J.Mizusaki, Effect of Mechanical Load on the Electrical Property of Yttria-Stabilized Zirconia, Electrochemistry and Thermodynamics on Materials Processing for Sustainable Production, Masko Symposium, (2006),823-827.
  29. * Kazuhisa Sato, Shintaro Kyotani,Toshiyuki Hashida,Hirokazu Moriya, Tatsuya Kawada, Keiji Yashiro, Takashi Nakamura, Hiroo Yugami, Junichiro Mizusaki, A New Method for Evaluating Degradation of Solid Oxide Fuel Cell under Operating Conditions by Combining the Electrochemical Measurement with Non-Destructive Test, Proceedings of Asian Symposium on Materials and Processing 2006,(2006),132-132.
  30. N. Yu, H. Yugami, K. Sato, and T. Hashida, Influences of microstructure on the mechanical behaviour in proton conductor based on BaZrO3/BaCeO3, 13th Solid State Proton Conductors Conference (SSPC-13), (2006), in CD-ROM.
  31. * S. Ogino, Y. Sato, G. Yamamoto, K. Sasamori, H. Kimura, T. Hashida, K. Motomiya, B. Jeyadevan, K. Tohji, Relation of the Number of Cross-links and Mechanical Properties of Multi-Walled Carbon Nanotube Films Formed by a Dehydration Condensation Reaction, Journal of Physical Chemistry B, Vol. 10, No. 46, (Nov., 2006), 23159-23163.
  32. * N. Yamasaki, Y. Yamasaki, K. Tohji, N. Tsuchiya, T. Hashida and K. Ioku, Hydrothermal dynamics on environmental problems using the aspect of earth science, Journal of Material Science, Vol. 41, No. 5, (2006), 1599-1604.

2005

  1. *  佐藤一永，八代圭司，大村肇，橋田俊之，水崎純一郎，模擬還元雰囲気下におけるセリア系固体酸化物型燃料電池の破壊挙動に関する研究, 2004年度傾斜機能材料論文集（FGM2004），(2005-3), 144-149. Kazuhisa Sato, Keiji Yashiro, Hajime Omura, Toshiyuki Hashida, and Junichiro Mizusaki, Fracture Behavior of Ceria-based Solid Oxide Fuel Cells under Simulated Reducing Atmosphere, Proceedings of the 16th Symposium on Functionally Graded Materials (FGM2004), (2005-3), 144-149.
  2. * 佐藤一永，鈴木研，橋田俊之，水崎純一郎，高温環境下におけるセリア系セラミックスの破壊特性に関する研究, 2004年度傾斜機能材料論文集（FGM2004），(2005-3),139-143. Kazuhisa Sato, Ken Suzuki, Toshiyuki Hashida, and Junichiro Mizusaki, Fracture Properties of Ceria-based Ceramics at High Temperature, Proceedings of the 16th Symposium on Functionally Graded Materials (FGM2004), (2005-3), 139-143.
  3. *小野木伯薫，田中雅明，細井和幸，橋田俊之，水熱法によるハイドロキシアパタイトセラミックスコーティング作製, 2004年度傾斜機能材料論文集（FGM2004），(2005-3),97-102. Takamasa Onoki, Masa-aki Tanaka, Kazuyuki Hosoi, and Toshiyuki Hashida, Preparation of Hydroxyapatite Ceramics Coatind on Titanium Rod by Hydrothermal Hot-pressing, Proceedings of the 16th Symposium on Functionally Graded Materials (FGM2004), (2005-3), 97-102.
  4. *山本　剛，大坪　誠，佐藤義倫，高橋　亨，大森　守，田路和幸，橋田俊之，カーボンナノチューブ固化体の作製と機械的特性の評価, 2004年度傾斜機能材料論文集（FGM2004），(2005-3), 25-30. Go Yamamoto, Makoto Otsubo, Yoshinori Sato, Toru Takahashi, Mamoru Omori, Kazuyuki Tohji, and Toshiyuki Hashida, Preparation and Mechanical Evaluation of Carbon Nanotube Solids, Proceedings of the 16th Symposium on Functionally Graded Materials (FGM2004), (2005-3), 25-30.
  5. *山本　剛，佐藤義倫，高橋　亨，大森　守，田路和幸，橋田俊之，三点曲げ試験法による単層カーボンナノチューブ固化体の機械的特性評価, 2004年度傾斜機能材料論文集（FGM2004），(2005-3),31-36. Go Yamamoto, Yoshinori Sato, Toru Takahashi, Mamoru Omori, Kazuyuki Tohji, and Toshiyuki Hashida, Mechanical Evaluation of Single-Walled Carbon Nanotube Solids by Three Point Bending Tests, Proceedings of the 16th Symposium on Functionally Graded Materials (FGM2004), (2005-3), 31-36.
  6. * S. Fomin, T. Hashida, V. Chugnov, A.V. Kuznetsov, A borehole temperature during drilling in a fractured rock formation, International Journal of Heat and Mass Transfer, Vol. 48 (2005), 385-394.
  7. * 山本剛、佐藤義倫、高橋亨、大森守、田路和幸、橋田俊之，放電プラズマ焼結法により作製した単層カーボンナノチューブバルク固化体の機械的特性，日本機会 学会論文集（A編）, Vol. 71, No. 702 (2005), 330-337. Go Yamamoto, Yoshinori Sato, Toru Takahashi, Mamoru Omori, Kazuyuki Tohji and Toshiyuki Hashida, Mechanical Properties of Single-Walled Carbon Nanotube Solids Prepared by Spark Plasma Sintering, Transactions of the Japan Society of Mechanical Engineers, Vol. 71, No. 702 (2005), 330-337.
  8. * A. Nakahira, T. Murakami, T. Onoki, T. Hashida, and K. Hosoi, Fabrication of Porous Hydroxyapatite Using Hydrothermal Hot Pressing and Post-Sintering, J. Am. Ceram. Soc., Vol. 88 , No. 5 (2005) , 1334-1336.
  9. * G. Yamamoto, M. Omori, Y. Sato, T. Takahashi, K. Tohji, and T. Hashida, Effects of Polycarbosilane Addition on the Mechanical Properties of Single-Walled Carbon Nanotube Solids, Proceedings of the 2nd JSME/ASME International Conference on Materials and Processing 2005–The 13th JSME Materials and Processing Conference (M&P2005) -, June 19-22, 2005-Seattle, Washington, USA, (2005), pp (PMC-10)-1-(PMC-10)-6, in CD ROM.
  10. * Kazuhisa Sato, Toshiyuki Hashida, Keiichi Yashiro, Hiroo Yugami, Tatsuya Kawada and Junichiro Mizusaki, Mechanical Damage Evaluation of Solid Oxide Fuel Cells under Simulated Operating Conditions, Journal of the Ceramic Society of Japan, Vol. 113, No. 8 (2005), 562-564.
  11. * G. Yamamoto, Y. Sato, T. Takahashi, M. Omori, T. Hashida, A. Okubo, S. Watanabe, K. Tohji, Preparation of Single-Walled Carbon Nanotube Solids and Their Mechanical Properties, Extended Abstracts of International Symposium on ScoTopia Science 2005 (ISETS05), (Nagoya University, Japan, August 8-9, 2005), OS4-3-2 (2005), 265-268.
  12. * M. Omori, T. Watanabe, M. Tanaka, A. Okubo, H. Kimura and T. Hashida, Toughening of Hydroxyapatite by Multi-Walled Carbon Nantube, Extended Abstracts of International Symposium on ScoTopia Science 2005 (ISETS05), (Nagoya University, Japan, August 8-9, 2005), OS4-3-3 (2005),269-270.
  13. * 佐藤一永，橋田俊之，八代圭司，湯上浩雄，川田達也，水崎純一郎，(CeO2) 1-x (SmO1.5) x電 解質を用いた積層型燃料電池単セルの破壊挙動の評価に関する研究, 粉体および粉末冶金，Vol. 52, No. 11，(2005), 836-839. Kazuhisa Sato, Toshiyuki Hashida, Keiji Yashiro, Hiroo Yugami, Tatsuya Kawada, and Junichiro Mizusaki, Evaluation of Fracture Behavior of (CeO2) 1-x (SmO1.5) x-Based Solid Oxide Fuel Cell Laminates, Journal of the Japan Society of Powder and Powder Metallurgy, Vol. 52, No. 11，(2005), 836-839.
  14. * 佐藤一永，橋田俊之，鈴木研，湯上浩雄，川田達也，水崎純一郎，(CeO2) 1-x (YO1.5) xの 合成と弾性特性の評価に関する研究, 粉体および粉末冶金，Vol. 52, No. 11，(2005), 840-844. Kazuhisa Sato, Toshiyuki Hashida, Keiji Yashiro, Hiroo Yugami, Tatsuya Kawada, and Junichiro Mizusaki, Evaluation of Elastic Property of (CeO2) 1-x (YO1.5) x Ceramics, Journal of the Japan Society of Powder and Powder Metallurgy, Vol. 52, No. 11，(2005), 840-844.
  15. *小野木伯薫，田中雅明，橋田俊之，リン酸水素カルシウム水和物と水酸化カルシウムを出発原料とした水熱法によるハイドロキシアパタイトコーティ ング,粉体および粉末冶金，Vol. 52, No. 11，(2005), 861-864. Takamasa Onoki, Masa-aki Tanaka, and Toshiyuki Hashida, New Processing Method for Hydroxyapatite Coating by Hydrothermal Techniques, Journal of the Japan Society of Powder and Powder Metallurgy, Vol. 52, No. 11, (2005),861-864.
  16. *山本　剛，佐藤義倫，大坪　誠，高橋　亨，大森　守，大久保　昭，田路和幸，橋田俊之，単層および多層カーボンナノチューブ固化体の作製と機械 的特性の評価,粉体および粉末冶金，Vol. 52, No. 11，(2005), 831-835. Go Yamamoto, Yoshinori Sato, Makoto Otsubo, Toru Takahashi, Mamoru Omori, Akira Okubo, Kazuyuki Tohji, and Toshiyuki Hashida, Preparation of Single- and Multi-Walled Carbon Nanotube Solids and Their Mechanical Properties, Journal of the Japan Society of Powder and Powder Metallurgy, Vol. 52, No. 11，(2005), 831-835.
  17. *山本　剛，佐藤義倫，高橋　亨，大森　守，大久保　昭，田路和幸，橋田俊之，放電プラズマ焼結法により作製した単層カーボンナノチューブ固化体 の機械的特性評価,粉体および粉末冶金，Vol. 52, No. 11，(2005), 826-830. Go Yamamoto, Yoshinori Sato, Toru Takahashi, Mamoru Omori, Akira Okubo, Kazuyuki Tohji, and Toshiyuki Hashida, Evaluation of Mechanical Properties of Single-Walled Carbon Nanotube Solids Prepared by Spark Plasam Sintering, Journal of the Japan Society of Powder and Powder Metallurgy, Vol. 52, No. 11，(2005), 826-830.
  18. *　G. Yamamoto, M. Omori, Y. Sato, T. Takahashi, K. Tohji, and T. Hashida “Effects of polycarbosilane addition on the mechanical properties of single-walled carbon nanotube solids” JSME Int. J.. , Series A, Vol. 48, No. 4, (2005), 189-193.
  19. *  Mamoru Omori, Akira Okubo, Toshiyuki Hashida and Kazuyuki Tohji, Preparation of Multi-Walled Carbon Nanotube Compact by the Spark Plasma System (SPS), 粉体および粉末冶金、Vol. 52, No. 2 (2005), 115-119.
  20. * Mamoru Omori, Akira Okubo, Yoshihiro Murakami, Takamasa Onoki and Toshiyuki Hashida, Preparation of Hydroxyapatite at Low Temperatures by Spark Plasma Sintering (SPS), in Archives of BioCeramics Research, Vol. 5 (2005), pp. 134-137.  (Proc. of Asian BioCeramics Symposium 2005, (Oct. 1-3, 2005, Hokkaido University, Sapporo, Japan), Edited by F. Watari, T. Akazawa, M. Uo and T. Akasaka)
  21. * G. Yamamoto, Y. Sato, T. Takahashi, M. Omori, T. Hashida, A. Okubo, S. Watanabe, and K. Tohji, Preparation of single-walled carbon nanotube solids and their mechanical properties, Journal of Materials Research, Vol.20, No. 10 (2005) , 2609-2612.
  22. * T. Ishida, F. Iguchi, K. Sato, T. Hashida and H. Yugami, “Fracture properties of (CeO2)1−x(RO1.5)x (R = Y, Gd, and Sm; x = 0.02–0.20) ceramics” , Solid State Ionics, Vol.176, 31-34, (2005), 2417-2421.
  23. * Sergei Fomin, Vladimir Chugunov and Toshiyuki Hashida, The effect of non-Fickian diffusion into　surrounding rocks on contaminant transport in a fractured porous aquifer, Proceedings of Royal Society A, Vol. 461 (2005), 2923-2939.
  24. * Peng-Cheng Zhai, Gang Chen, Toshiyuki Hashida, and Qing-Jie Zhang, Evaluation on Small Punch Creep Test by Finite Element Method, Key Engineering Materials Vols. 297-300 (2005) pp. 377-383. (online at http://www.scientific.net)

2004

  1. * M. Omori, A. Okubo, M. Otsubo, T. Hashida and K. Tohji, Consolidation of Multi-Walled Carbon Nanotube and Hydroxyapatite Coating by the Spark Plasma System (SPS), Key Engineering Materials, Vols. 254-256 (2004), 395-398.
  2. * 板岡幹世、佐藤一志、橋田俊之、水圧破砕き裂進展における分散型微視き裂領域形成の数値シミュレーションに関する研究、日本機械学会論文集(A 編),Vol.70，No. 689 (2004-1), 114-119. M. Itaoka, K. Sato and T. Hashida, Numerical Simulation of the Formation of Distributed Microcrack Zone Induced by Hydraulic Fracturing, Transactions of the Japan Society of Mechanical Engineers, Vol.70，No. 689 (2004-1), 114-119.
  3. *佐藤一永，湯上浩雄，橋田俊之，小型試験法を用いたセリア系セラミックスの破壊特性の及ぼす希土類酸化物添加の影響評価，日本機械学会論文集 （A編），Vol. 70, No. 690 (2004), 321-326. Kazuhisa Sato, Hiroo Yugami and Toshiyuki Hashida, Evaluation of the Effect of Rare-earth Oxides on Fracture Properties of Ceria Ceramics by Small Specimen Method, Transactions of the Japan Society of Mechanical Engineers, Vol. 70, No. 690 (2004), 321-326.
  4. * Kazushi Sato and Toshiyuki Hashida, Fracture Simulation of Randomly Cracked Material with Various Crack Length Distributions, Key Engineering Materials, Vols. 261-263 (2004), 1055-1060.
  5. * 駒崎慎一，劉　世程，権　一賢，橋田俊之，高橋秀明，中嶋秀夫，核融合炉超伝導マグネット構造材JN1鋼の極低温破壊靱性に及ぼす加熱時効の影響，日本機 械学会論文集（A編）, Vol. 70, No. 690 (2004), 273-280.  Shin-ichi Komazaki, Shi Cheng Liu, Il-Hyun Kwon, Toshiyuki Hashida, Hideaki Takahashi and Hideo Nakajima, Influence of Thermal Aging on Cryogenic Fracture Toughness of JN1 Steel for Superconducting Magnet Structures of Fusion Reactors, Vol. 70, No. 690 (2004), 273-280.
  6. * 劉　世程，駒崎慎一，権　一賢，橋田俊之，高橋秀明，中嶋秀夫，極低温小形パンチ試験によるオーステナイト系ステンレス鋼JN1, JJ1およびJK2の熱時効脆化評価，日本機械学会論文集（A編）, Vol. 70, No. 692 (2004), 628-635. Shi Cheng Liu, Shin-ichi Komazaki, Il-Hyun Kwon, Toshiyuki Hashida, Hideaki Takahashi and Hideo Nakajima, Evaluation of Thermal Aging Embrittlement of Austenitic Stainless Steels JN1, JJ1 and JK2 by Cryogenic Small Punch Tests, Transactions of the Japan Society of Mechanical Engineers, Vol. 70, No. 692 (2004), 628-635.
  7. * Hiroyuki Takashima, Hideaki Nishimatsu, Kiyotaka Miyagai, Toshiyuki Hashida, Effect of Perlite Addition on Fracture Properties of Discontinuous Fiber-reinforced Cementitious Composites Manufactured by Extrusion Molding, Proceedings of the Fifth International Conference on Fracture Mechanics of Concrete and Concrete Structures, Edited by V.C. Li et al.,  (Vail, Colorado, USA, April 12 –16, 2004), (2004), 1029-1036.
  8. * Peng Cheng Zhai, Toshiyuki Hashida, Shin-ichi Komazaki and Qing Jie Zhang, Numerical Analysis for Small Punch Creep Tests by Finite Element Method, Journal of Testing and Evaluation, Vol. 32, No. 4 (2004), 298-303.
  9. * Sergei Fomin and Toshiyuki Hashida, Advances in Mathematical Modeling of Hydraulic Stimulation of a Subterranean Fractured Reservoir, Proceedings of 8th International Workshop on New Approaches to High-Tech: Nondestructive Testing and Computer Simulations in Science and Engineering, (June 7-13, 2004, St. Petersburg, Russia), (Proceedings of the St. Petersburg Academy of Sciences on Strength Problems (SPAS)), Vol. 8 (2004), 8-11.
  10. * Sergei Fomin and Toshiyuki Hashida, Three Regimes of a Steady-State Rimming Flow of the Liquid Polymers, Slow Dynamics in Complex Systems, Proceedings of 3rd International Symposium on Slow Dynamics in Complex Systems, (November 3-8, 2003, Sendai, Japan), Edited by Michio Tokuyama and Irwinb Oppenheim, Volume 708 (2004), 275-276.
  11. * Kei Yoshida, Sergei Fomin, Zhenzi Jing and Toshiyuki Hashida, Dynamics in a Complex-Fracture-Subterranean-System with Application to HDR Geothermal Reservoirs, Slow Dynamics in Complex Systems, Proceedings of 3rd International Symposium on Slow Dynamics in Complex Systems, (November 3-8, 2003, Sendai, Japan), Edited by Michio Tokuyama and Irwinb Oppenheim, Volume 708 (2004), 460-461.
  12. * 小野木伯薫，田中雅明，細井和幸，橋田俊之, 水熱ホットプレス法によるチタンとハイドロキシアパタイトセラミックス接合に及ぼす圧力，反応時間の影響, 2003年度傾斜機能材料論文集，（第15回傾斜機能材料国内シンポジウム（FGM2003札幌）講演論文集，(平成15年11月20日-21日，北西学 園大学，札幌)），(2004-7), 1-4.      Takamasa Onoki, Masa-aki Tanaka, Kazuyuki Hosoi, and Toshiyuki Hashida, Effects of Pressure and Reaction Time on the Bonding of Hydroxyapatite Ceramics and Tatanium by Hydrothermal Hot-pressing Method, Proceedings of the 15th Symposium on Functionally Graded Materials (FGM2003 in Sapporo), (November 20-21, 2003, Hokusei Gakuenn, Sapporo), (2004-7), 1-4.
  13. * 大森 守，大久保昭， 大坪　誠，田路和幸，橋田俊之, カーボンナノチューブの固化とハイドロキシアパタイト被覆, 2003年度傾斜機能材料論文集，（第15回傾斜機能材料国内シンポジウム（FGM2003札幌）講演論文集，(平成15年11月20日-21日，北西学 園大学，札幌)），(2004-7), 10-15.                                                 Mamoru Omori, Akira Okubo, Makoto Otsubo, Kazuyuki Tohji, and Toshiyuki Hashida, Consolidation of Multi-Wallled Carbon Nanotube and Hydroxyapatite Coating, Proceedings of the 15th Symposium on Functionally Graded Materials (FGM2003 in Sapporo), (November 20-21, 2003, Hokusei Gakuenn, Sapporo), (2004-7), 10-15.
  14. * 山本 剛，大坪 誠，佐藤義倫，高橋 亨，大森 守，田路和幸, 橋田俊之，単層カーボンナノチューブ焼結体の機械的特性に及ぼす不純物の影響, 2003年度傾斜機能材料論文集，（第15回傾斜機能材料国内シンポジウム（FGM2003札幌）講演論文集，(平成15年11月20日-21日，北西学 園大学，札幌)），(2004-7), 157-162.              Go Yamamoto, Makoto Otsubo, Yoshinori Sato, Toru Takahashi, Mamoru Omori, Kazuyuki Tohji, and Toshiyuki Hashida, Effect of Impurities on Mechanical Properties of SWNTs Compact Prepared by Spark Plasma Sintering Method, Proceedings of the 15th Symposium on Functionally Graded Materials (FGM2003 in Sapporo), (November 20-21, 2003, Hokusei Gakuenn, Sapporo), (2004-7), 157-162.
  15. * 高橋　亨，橋田俊之，高温・高圧水環境下における花崗岩のせん断破壊とすべり軟化挙動，材料，Vol. 53, No. 8, (2004), 889-893.  Toru Takahashi and Toshiyuki Hashida, Shear Fracture and Slip Weakening Behavior on Granite under High Pressure and High Temperature Water Conditions, Journal of the Society of Materials Science, Japan, (J. Soc. Mat. Sci., Japan), Vol. 53, No. 8, (2004), 889-893.
  16. * 佐藤一志，橋田俊之，岩石の開口型き裂進展の評価，材料，Vol. 53, No. 8, (2004), 894-899.                                                                    Kazushi Sato and Toshiyuki Hashida, Evaluation of Mode I Crack Growth in Rock, Journal of the Society of Materials Science, Japan, (J. Soc. Mat. Sci., Japan), Vol. 53, No. 8, (2004), 894-899.
  17. * Kazuhisa Sato, Hiroo Yugami and Toshiyuki Hashida, Effect of Rare-earth Oxides on Fracture Properties of Ceria Ceramics, Journal of Materials Science, Vol. 39 (2004), 5765-5770.
  18. * Kazuhisa Sato, Hiroo Yugami and Toshiyuki Hashida, Mechanical and Electrical Properties of Rare-earth Doped Ceria Ceramics for SOFC Electrolyte, Transactions of the Materials Research Society of Japan, Vol. 29, No. 4, (2004), 1471-1474.
  19. * Takamasa Onoki, Kazuyuki Hosoi and Toshiyuki Hashida, Novel Techniques of Hydroxyapatite Coating on Titanium Utilizing Hydrothermal Hot-pressing, Transactions of the Materials Research Society of Japan, Vol. 29, No. 6, (2004), 2675-2678.
  20. * Takamasa Onoki, Kazuyuki Hosoi and Toshiyuki Hashida, GD-OES Analysis of the Interface Between Titanium and Hydroxyapatite Ceramics Produced by Hydrothermal Hot-pressing, Transactions of the Materials Research Society of Japan, Vol. 29, No. 6, (2004), 2929-2932.
  21. *Sergei Fomin, and Toshiyuki Hashida, Rimming Flow of Non-Newtonian Fluids, Proceedings of IMECE04 2004 ASME International Mechanical Engineering Congress and Exposition, (November 13-20, 2004, Anaheim, California USA), IMECE2004-6144, (2004), in CD ROM
  22. * Sergei Fomin, Toshiyuki Hashida, and Vladimir Chugunov, High-Pressure Hydraulic Stimulation of Geothermal Reservoir, Proceedings of IMECE04 2004 ASME International Mechanical Engineering Congress and Exposition, (November 13-20, 2004, Anaheim, California USA), IMECE2004-61444, (2004), in CD ROM.
  23. * Y. Sato, M. Ohtsubo, B. Jeyadevan, K. Tohji, K. Motomiya, R. Hatakeyama, G. Yamamoto, M. Omori, T. Hashida, K. Tamura, T. Akasaka, M. Uo, A. Yokoyama, F. Watari, Biocompatibility of Carbon Nanotube Disk, Proceedings of The International Society for Optical Engineering (SPIE) -Nanosensing: Materials and Devices, (25-28 October 2004, Philadelphia, Pennsylvania, USA), Vol. 5593 (2004), 623-627.
  24. * Zhenzi Jing, Norihisa Matsuoka, Fangming Jin, Koichi Suzuki, Toshiyuki Hashida, and Nakamichi Yamasaki, Hydrothermal Solidification of Municipal Incineration Bottom Ash, Water, Steam, and Aqueous Solutions for Electric Power, Advances in Science and Technology, Proceedings of the 14th International Conference on the Properties of Water and System, (Kyoto International Conference Hall, Kyoto, Japan, August 29-September 3, 2004), Edited by M. Nakahira, N. Matubayasi, M. Ueno, K. Yasuoka and K. Watanabe, (2004), pp. 335-340.
  25. * Sergei Fomin, Zhenzi Jing and Toshiyuki Hashida, Simulation of Transport Phenomena in Fractured RocksWith Application to Hot-Dry-Rock Geothermal Systems, Water, Steam, and Aqueous Solutions for Electric Power, Advances in Science and Technology, Proceedings of the 14th International Conference on the Properties of Water and System, (Kyoto International Conference Hall, Kyoto, Japan, August 29-September 3, 2004), Edited by M. Nakahira, N. Matubayasi, M. Ueno, K. Yasuoka and K. Watanabe, (2004), pp. 707-712.
  26. * Sergei Fomin, Shin-ichi Takizawa and Toshiyuki Hashida, Flow Analysis for Laboratory Permeability Testing of Rocks Under Supercritical Water Conditions, Water, Steam, and Aqueous Solutions for Electric Power, Advances in Science and Technology, Proceedings of the 14th International Conference on the Properties of Water and System, (Kyoto International Conference Hall, Kyoto, Japan, August 29-September 3, 2004), Edited by M. Nakahira, N. Matubayasi, M. Ueno, K. Yasuoka and K. Watanabe, (2004), pp. 713-717.
  27. * S. Fomin, Z. Jing and T. Hashida, The Effect of Thermal, Chemical, Hydrogical, and Mechanical factors on Water/Rock Interaction in HDR Geothermal Systems, Coupled Thermo-Hydro-Mechanical-Chemical Processes in Geo-Systems; Fundamentals, Modelling, Experiments & Applications, Edited by Ove Stephansson, John A. Hudson, and Lanru Jing, Elsevier Geo-Engineering Book Series, Volume 2, (2004), 649-654.
  28. * Toshiyuki Hashida, Toru Takahashi, Supercritical Water/Rock Interactions and Generation of Artificial Geothermal Reservoirs in Deep-Seated High Temperature Rock Masses, Coupled Thermo-Hydro-Mechanical-Chemical Processes in Geo-Systems; Fundamentals, Modelling, Experiments & Applications, Edited by Ove Stephansson, John A. Hudson, and Lanru Jing, Elsevier Geo-Engineering Book Series, Volume 2, (2004),661-665.
  29. * Toru Takahashi and Toshiyuki Hashida, Microcrack Formation and Fracture Characteristics in Granite Under Supercritical Water Conditions, Coupled Thermo-Hydro-Mechanical-Chemical Processes in Geo-Systems; Fundamentals, Modelling, Experiments & Applications, Edited by Ove Stephansson, John A. Hudson, and Lanru Jing, Elsevier Geo-Engineering Book Series, Volume 2, (2004),685-690.
  30. * Sergei Fomin, Vladimir Chugunov and Toshiyuki Hashida, Mathematical Modelling of Borehole Grouting in Permafrost, Coupled Thermo-Hydro-Mechanical-Chemical Processes in Geo-Systems; Fundamentals, Modelling, Experiments & Applications, Edited by Ove Stephansson, John A. Hudson, and Lanru Jing, Elsevier Geo-Engineering Book Series, Volume 2, (2004),773-779.
  31. * F. Iguchi, Y. Endo, T. Ishida, K. Sato, T. Hashida, H. Yugami, Creep and Fracture Strength of Rare Earth Doped Ceria, Proceedings for the 9th Asian Conference on Solid Stance Ionics, (2004),179-186.

2003

  1. * Toru Takahashi, Koji Tanifuji, Catherine Stafford and Toshiyuki Hashida, Permeability Enhancement by Microfracturing in Granite under Supercritical Water Conditions, JSME International Journal, Series A, Vol. 46, No. 1 (2003), 24-29.
  2. * Y. C. Zhou, T. Hashida and C. Y. Jian, Determination of Interface Fracture Toughness in Thermal Barrier Coating System by Blister Tests, Transactions of the ASME, Journal of Engineering Materials and Technology, Vol. 125 (2003), 176-182.
  3. *橋田俊之、超高温岩体からの抽熱の可能性、地熱エネルギー、Vol. 28, No. 1, Ser. 101 (2003), 67-80. Toshiyuki Hashida, Thermal Extraction from Supercritical Rock Masses, Vol. 28, No. 1, Ser. 101  (2003), 67-80.
  4. * Lihui Liu, Yuko Suto, Greg Bignall, Nakamichi Yamasaki, and Toshiyuki Hashida, CO2 injection to granite and sandstone in experimental rock/hot water systems, Energy Conversion and Management, Vol. 44/9 (2003), 1399-1410.
  5. * S. Fomin, T. Hashida, and J. Watterson, Fundamentals of Steady-state Non-Newtonian Rimming Flow, J. Non-Newtonian Fluid Mech., Vol. 111 (2003), 19-40.
  6. * Sergei Fomin, Kei Yoshida, and Toshiyuki Hashida, Numerical Model for the Fracture Type Geothermal Reservoir with the Multi-Borehole System, Proceedings of The 6th ASME-JSME Thermal Engineering Joint Conference, (March 16-20, 2003), TED-AJ03-202, (2003), in CD ROM.
  7. *Sergei Fomin, Vladimir Chugunov, Toshiyuki Hashida, Seiji Saito and Yuko Suto, Mathematical Modelling of the Heat Transfer Between the well and Surrounding Rocks, Proceedings of The 6th ASME-JSME Thermal Engineering Joint Conference, (March 16-20, 2003), TED-AJ03-203, (2003), in CD ROM.
  8. * Hiroyuki Takashima, Kiyotaka Miyagai, Toshiyuki Hashida, and Victor C. Li, A Design Approach for the Mechanical Properties of Polypropylene Discontinuous Fiber Reinforced Cementitious Composites by Extrusion Molding, Engineering Fracture Mechanics,Vol. 70, Issues 7-8, (2003), 853-870.
  9. * Peng-cheng Zhai, Toshiyuki Hashida and Qing-jie Zhang, Energy Release Rates of Functionally Graded Materials with Interface Edge-Cracks under Uniform Temperature Change, Materials Science Forum, Vols. 423-425 (2003), 613-617. [ Proceedings of the Seventh International Symposium on Functionally Graded Materials, (October 15-19, 2002, Beijing, China), Edited by Wei Pan, Jianghong Gong, Lianmeng Zhang, and Lindong Chen, Trans Tech Publications Ltd., (2003) , 613-617.]
  10. * Lihui Liu, Toshiyuki Hashida, Satoshi Teramura and Kimitoshi Karino, Development of a Method for CO2 Solidification of Glass and Concrete Waste Composites, J. of the Ceramic Society of Japan, Vol. 111, No. 5 (2003), 357-361.（劉麗輝、橋田俊之、寺村敏史、狩野公俊、炭酸ガス固化法によるコンクリート廃材とガラス廃材の再利用に関する研究、日本セラミックス協 会学術論文誌、Vol. 111, No. 5 (2003), 357-361.）
  11. * 小野木伯薫、主森哲朗、小川和洋、橋田俊之、庄子哲雄、円山政秀、富樫博之、鳥越泰治、熱遮蔽コーティングの界面はく離挙動に及ぼす熱時効処理の影響、材 料、Vol. 52, No. 7 (2003), 807-814. Takamasa Onoki, Tetsuro Tonomori, Kazuhiro Ogawa, Toshiyuki Hashida, Tetsuo Shoji, Masahide Maruyama, Hiroyuki Ogashi, Yaiji Torigoe, Influence of Thermal Aging on Interface Delamination of Thermal Barrier Coatings, Journal of the Society of Materials Science, Japan,  材料、Vol. 52, No. 7 (2003), 807-814.
  12. * Vladimir Chugunov, Sergei Fomin, and Toshiyuki Hashida, Heat Flow rate at a Bore-face and Temperature in the Multi-layer Media surrounding a borehole, Int. J. of heat and Mass Transfer, Vol. 46 (2003), 4769-4778.
  13. *高島博之、西松英明、宮外清貴、橋田俊之、セメント系繊維複合押出成形材料の破壊特性に及ぼすパーライト添加の影響、コンクリート工学年次論文 集、Vol. 25, No. 1 (2003), 239-244. Hiroyuki Takashima, Hideaki Nishimatsu, Kiyotaka Miyagai, Toshiyuki Hashida, Effect of Perlite Addition on Fracture Properties of Discontinuous Fiber-reinforced Cementitious Composites Manufactured by Extrusion Molding, Proceedings of the Japan Concrete Institute (JCI) Annual Meeting、Vol. 25, No. 1 (2003), 239-244.
  14. * S. Fomin, T. Hashida, A. Shimizu, K. Matsuki and K. Sakaguchi, Fractal Concept in Numnerical Simulation of Hydraulic Fracturing of the Hot Dry Rock Geothermal Reservoir, Hydrological Processes, Vol. 17 (2003), 2975-2989
  15. * S. Fomin, V. Chugunov and T. Hashida, Analytical Modelling of the Formation Temperature Stabilization During the Borehole Shut-in Period, Geophysical Journal International (Geophys. J. Int.), Vol. 155 (2003), 469-478.
  16. * S. Fomin, Z. Jing and T. Hashida, The Effect of Thermal, Chemical, Hydrogical, and Mechanical factors on Water/Rock Interaction in HDR Geothermal Systems, Proceedings of International Conference on Coupled T-H-M-C Processes in Geo-systems: Fundamentals, Modelling, Experiments & Applications, (13-15 October 2003, Royal Institute of Technology (KTH), Stockholm, Sweden), (2003), 647-652.
  17. * Toshiyuki Hashida, Toru Takahashi, Supercritical Water/Rock Interactions and Generation of Artificial Geothermal Reservoirs in Deep-Seated High Temperature Rock Masses, Proceedings of International Conference on Coupled T-H-M-C Processes in Geo-systems: Fundamentals, Modelling, Experiments & Applications, (13-15 October 2003, Royal Institute of Technology (KTH), Stockholm, Sweden), (2003),659-664.
  18. * Toru Takahashi and Toshiyuki Hashida, Microcrack Formation and Fracture Characteristics in Granite Under Supercritical Water Conditions, Proceedings of International Conference on Coupled T-H-M-C Processes in Geo-systems: Fundamentals, Modelling, Experiments & Applications, (13-15 October 2003, Royal Institute of Technology (KTH), Stockholm, Sweden), (2003),683-688.
  19. * Sergei Fomin, Vladimir Chugunov and Toshiyuki Hashida, Mathematical Modelling of Borehole Grouting in Permafrost, Proceedings of International Conference on Coupled T-H-M-C Processes in Geo-systems: Fundamentals, Modelling, Experiments & Applications, (13-15 October 2003, Royal Institute of Technology (KTH), Stockholm, Sweden), (2003),769-774.
  20. *　K. Yoshida, S. Fomin and T. Hashida, Numerical Simulation of the Large-Scale Geothermal Reservoir With Multiple-Borehole-Circulation System, Geothermal Resources Council Transactions, Vol. 27 (2003), 747-751.
  21. *高島博之、西松英明、宮外清貴、橋田俊之、ポリビニルアルコール繊維複合セメント系押出成形材料のマルチプルクラック発生条件に関する破壊力学 的研究，高靱性セメント複合材料に関するシンポジウム論文集（2003年12月4-5日，中央大学，東京），社団法人日本コンクリート工学協会 （2003），23-30. Hiroyuki Takashima, Hideaki Nishimatsu, Kiyotaka Miyagai and Toshiyuki Hashida, Conditions of Multiple Cracking for Poly Vinyl Alcohol Discontinuous Fiber Reinforced Extruded Cementitous Composites, Proceedings of JCI Symposium on Ductile Fiber reinforced Cementitous Composites (DFRCC), (December 4-5th, Chuo University, Tokyo), (2003), 23-30.
  22. *　小野木伯薫、橋田俊之、細井和之、骨置換材料のための水熱ホットプレス法によるハイドロキシアパタイトセラミックス-チタン接合体の作製、日 本生体電気刺激研究会誌，Vol. 17 (2003), 21-23. Takamasa Onoki, Toshiyuki Hashida, Kazuyuki Hosoi, Bonding Hydroxyapatite Ceramics and Titanium by Hydrothermal Hot-pressing Method, Journal of The Japanese Bio-Electrical Research Society (JJBERS) ,
  23. * 李俊国、小野木伯薫、劉麗輝、橋田俊之、HApセラミックの層状構造形成に及ぼすNH4+の役割，日本生体電気刺激研究会誌，Vol. 17 (2003), 27-33. Jungo Li, Takamasa Onoki, Lihui Liu, Toshiyuki Hashida, Role of NH4+ on the Formation of Hydroxyapatite Ceramics with Lamellar Structure by Hydrothermal Hot-Pressing, Journal of The Japanese Bio-Electrical Research Society (JJBERS) , Vol. 17 (2003), 27-33.
  24. * Sergei Fomin, Ayumu Shimizu, and Toshiyuki Hashida, Numerical Simulation of the Fracture Type Reservoir Growth During Hydraulic Fracturing, International Journal of Strength, Fracture and Complexity, Vo. 1, No. 2 (2001), 69-77.　(Special Issue: International Conference on Complexity and Frontiers in Strength and Fracture (ICS ’01), June 24-27, 2001, Sendai International Center, Sendai, Japan),
  25. *Kazushi Sato, Akihide Saimoto, Toshiyuki Hashida, and Yasufumu Imai, Numerical Simulation of Crack Propagation and Coalescence in Randomly Distributed Crack System, Strength, Fracture and Complexity, Vol. 1, No. 4 (2003), 205-213.　(Special Issue: International Conference on Complexity and Frontiers in Strength and Fracture (ICS ’01), June 24-27, 2001, Sendai International Center, Sendai, Japan).
  26. * Akihide Saimoto, Yasufumi Imai and Toshiyuki Hashida,The genesis of echelon-mode-I cracks in the neighbourhood of a mode-II-crack tip under uniaxial compression, Key Engineering Materials – ADVANCES IN FRACTURE AND DAMAGE MECHANICS, Vol. 251, No. 2 (2003),  327-332.
  27. * Akihide Saimoto, Yasufumi Imai and Toshiyuki Hashida, Simulation of the compressive fracture of brittle and disordered solids, Key Engineering Materials,Vol. 243, No. 2 (2003), 285-290.
  28. * Takamasa Onoki Kazuyuki Hosoi, Toshiyuki Hashida, Joining hydroxyapatite ceramics and titanium alloys by hydrothermal method, Key Engineering Materials – PROGRESS IN EXPERIMENTAL AND COMPUTATIONAL MECHANICS IN ENGINEERING   , Vol. 240, No. 2:, (2003), 571-574.

2002

  1. *Y.C. Zhou and T. Hashida, Thermal Fatigue in Thermal Barrier Coating, JSME International Journal, Series A, Vol. 45, No. 1 (2002), 57-64.　 (Special Issue on Creep and Fatigue at Elevated Temperatures)
  2. * Zhenzi Jing, Kimio Watanabe, Jonathan Willis-Richards, and Toshiyuki Hashida, A 3-D water/rock chemical interaction model for prediction of HDR/HWR geothermal reservoir performance, Geothermics, Vol. 31 (2002), 1-28.
  3. *高島博之、宮外清貴、橋田俊之、Victor C. Li、押出成形によるポリプロピレン短繊維補強セメント系複合材料のマルチプルクラック発生条件に関する破壊力学的研究、コンクリート工学論文集、 Vol. 13, No. 1 (2002-1月), 1-11. Hiroyuki Takashima, Kiyotaka Miyagai, Toshiyuki Hashida and Victor C. Li, Conditions of Multiple Cracking for Polypropylene Discontinuous Fiber Reinforced Cementitious Composites Manufactured by Extrusion Molding, Journal of Concrete Research and Technology, Vol. 13, No. 1 (Jan, 2002), 1-11.
  4. * 須藤祐子、谷藤浩二、渡邊公雄、橋田俊之、庄子哲雄、高橋秀明、模擬地熱貯留層環境下における花崗岩の溶解速度の温度・流速依存性, 日本地熱学会誌, Vol. 24, No. 1 (2002), 47-56. Yuko Suto, Koji Tanifuji, Kimio Watanabe, Toshiyuki Hashida, Tetsuo Shoji and Hideaki Takahashi, ｘDependence of the Rate of Granite Dissolution on Temperature and Fluid Velocity under Simulated Geothermal Reservoir Environments, Journal of Geothermal Research Society of Japan, Vol. 24, No. 1 (2002), 47-56.
  5. * Y. C. Zhou and T. Hashida, Thermal Fatigue Failure Induced by Delamination in Thermal Barrier Coating, International Journal of Fatigue, 24(2002), 407-417.
  6. * Lihui Liu, Qi Feng, Kazumichi Yanagisawa, Greg Bignall and Toshiyuki Hashida, Lithiation reactions of Zn- and Li-birnessites in non-aqueous solutions and their stabilities, Journal of Materials Science, 37-7 (2002), 1315-1320.
  7. * Kei Yoshida, Ayumu Shimizu, Sergei Fomin and Toshiyuki Hashida, Computer simulation of fluid flow in fractured media: The effect of thermal dispersion, Proceedings of the St. Petersburg Academy of Sciences on Strength Problems, (Proceedings of 6th International Workshop on New Approaches to High-Tech: Nondestructive Testing and Computer Simulations in Science and Engineering), Edited by Alexander I. Melker, (June 10-16, 2002, St. Petersburg, Russia), Vol. 6, (2002), pp. E23-E26.
  8. * Sergei Fomin, Ayumu Shimizu, Koji Matsuki, Kiyotoshi Sakaguchi and Toshiyuki Hashida, Simulation of the fracture shear dilation, Proceedings of the St. Petersburg Academy of Sciences on Strength Problems, (Proceedings of 6th International Workshop on New Approaches to High-Tech: Nondestructive Testing and Computer Simulations in Science and Engineering), Edited by Alexander I. Melker, (June 10-16, 2002, St. Petersburg, Russia), Vol. 6, (2002), pp.E27-E30.
  9. *Alexander V. Wilchinsky, Sergei A. Fomin, and Toshiyuki Hashida, Contact melting inside an elastic capsule, International Journal of Heat and Mass Transfer, Vol. 45 (2002), 4097-4106.
  10. * Maribel L. Saucedo-Munoz, Shi Cheng Liu, Shin-ichi Komazaki, I1-Hyun Kwon, Toshiyuki Hashida, Hideaki Takahashi and Hideo Nakjima, Evaluation of Thermal Aging Embrittlement of Austenitic Stainless Steels JN1, JJ1 and JK2 by Cryogenic Small-Punch Testing, Journal of Materials Research, Vol. 17, No. 4 (2002), 852-860.
  11. * T. Onoki, K. Hosoi and T. Hashida, Bonding property of Hydroxyapatite and Titanium Treated with Hydrothermal Alkali Solution, Proceedings of 5th International Conference on Solvo-Thermal Reactions, (July 22-26, 2002, East Brunswick Hilton, East Brunswick, NJ), Edited by Richard E. Riman, (2002), pp. 250-253.
  12. * Nakamichi Yamasaki, Akihiro Shirakawa, Nobuo Hirano, and Toshiyuki Hashida, Examination of Solidified waste glass powder after hydrothermal hot pressing, Journal of Materials Science Letter, Vol. 21, No. 9 (May 1, 2002), 711-713.
  13. * Sergei Fomin, Ayumu Shimizu and Toshiyuki Hashida, Mathematical Modeling of Convection Heat Transfer in a Geothermal Reservoir of Fractal Geometry, Proceedings of the Twelfth International Heat Transfer Conference, August 18-23, 2002, Grenoble, France, Edited by Jean Taine, Elsevier SAS, (2002), 809-814.
  14. *Hiroyuki Takashima, Kiyotaka Miyagai, Toshiyuki Hashida, Fracture Properties of Discontinuous Fiber Reinforced Cementitious Composites Manufactured by Extrusion Molding, Proceedings of the JCI International Workshop on Ductile Fiber Reinforced Cementitious Composites (DFRCC) –Application and Evaluation- (October 21-22, 2002, Takayama, Japan), Japan Concrete Institute, (2002), 75-83.
  15. * Mikiyo Itaoka, Kazushi Sato, and Toshiyuki Hashida, Numerical Simulation of Geothermal Reservoir Formation Induced by Hydraulic Fracturing at Great Depth, Geothermal Resources Council Transactions, Vol. 26, (2002), 297-302.
  16. *S. Fomin, K. Yoshida and T. Hashida, Analysis of Thermal Effectiveness of Geothermal Multi-Borehole Circulating System, Geothermal Resources Council Transactions, Vol. 26, (2002), 279-283.
  17. *Sergei Fomin, Vladimir Chugunov, Toshiyuki Hashida, Seiji Saito and Yuko Suto, Heat Flux on the Bore-Face and Temperature Distribution in the Formation, Geothermal Resources Council Transactions, Vol. 26, (2002), 803-807.
  18. * Takamasa Onoki, Kazuyuki Hosoi and Toshiyuki Hashida, Joining Hydroxyapatite Ceramics and Titanium Alloys by Hydrothermal Method, Proceedings of the 15th International Symposium on Ceramics in Medicine (ISCM), Edited by Besin Ben-Nissan, Doron Sher, and William Walsh, (University of Technology, Sydney, Sydney, Australia, December 4th-8th, 2002), Vol. 15, (2002), 571-574.　(Or  Key Engineering Materials, Vols 240-242 (2003), 571-574.)
  19. * Maribel L. Saucedo-Munoz, Shin-ichi Komazaki, Toru Takahashi, Toshiyuki Hashida and Tetsuo Shoji, Creep Property Measurement of Service Exposed SUS 316 Austenitic Stainless Steel by the Small Punch Creep Testing Technique, Journal of Materials Research, Vol. 17, No. 8 (2002), 1945-1953.
  20. * Y. C. Zhou, T. Tonomori, A. Yoshida, L. Liu, G. Bignall and T. Hashida, Fracture characteristics of thermal barrier coatings after tensile and bending tests, Surface and Coatings Technology, Vol.157, Issues 2-3 (2002), 118-127.
  21. * Y. C. Zhou and T. Hashida, Delamination Cracking in Thermal Barrier Coating System, Transactions of the ASME, Journal of Engineering for Gas Turbines and Power, Vol. 124, No. 4 (2002), 922-930.

2001

  1. *Junguo Li, Lianmeng Zhang, Qiang Shen, and Toshiyuki Hashida, Degradation of Yttria Stabilized Zirconia at 370 K under a Low Applied Stress, Materials Science and Engineering, Vol. A297 (2001), 26-30.
  2. * H. Takashima, K. Miyagai, T. Hashida and V.C. Li, Design for the Mechanical Properties of Polypropylene Discontinuous Fiber-Reinforced Cementitious Composites Manufactured by Extrusion Molding, Fracture Mechanics of Concrete Structures, Edited by R. de Borst, J. Mazars, G. Pijaudier-Cabot, and J.G.M. van Mier, A.A. Balkema Publishers, Vol. 1 (2001), 115-122.  (Proceedings of the Fourth International Conference on Fracture Mechanics of Concrete and Concrete Structures, May 28-June 1, 2001, Cachan, France)
  3. *  Y. C. Zhou and T. Hashida, Thermal Failure Mechanism of Thermal Barrier Ceramic Coating at High Temperature, Proceedings of the Fourth International Congress on Thermal Stresses, June 8-11, 2001, Osaka, Japan, (2001), 567-570.
  4. *  Y. C. Zhou and T. Hashida, Thermal Fatigue in Thermal Barrier Coating, Proceedings of the 7th International Conference on Creep and Fatigue at Elevated Temperatures, June 3-8, 2001, National Institute for Materials Science, Tsukuba, Japan, (2001), 641-646.
  5. *Y. Suto, L. Liu, T. Hashida, N. Tsuchiya and N. Yamasaki, Experimental study of rock/water/CO2 interaction at temperatures of 100-350, Proceedings of the Tenth International Symposium on Water-Rock Interaction (WRI-10), Vol. 1, Edited by Rosa Cidu, July 10-15, 2001, Villasimius, Italy, (2001), 341-344.
  6. *Y. C. Zhou and T. Hashida, Coupled Effects of Temperature Gradient and Oxidation on Thermal Stress in Thermal Barrier Coating System, International Journal of Solids and Structures, Vol. 38, (2001), 4235-4264.
  7. *Y. C. Zhou and T. Hashida, Determination of Interface Fracture Toughness by Blister Tests: Theoretical Model, Proceedings of Sixth International Conference on Biaxial/Multiaxial Fatigue & Fracture, Volume I, Edited by Manuel Moreira de Freitas, (June 25-28, 2001, Lisboa, Portugal), (2001), pp. 355-362.
  8. *Y. C. Zhou and T. Hashida, Fracture of Thermal Barrier Ceramic Coating at High Temperature, Proceedings of Sixth International Conference on Biaxial/Multiaxial Fatigue & Fracture, Volume II, Edited by Manuel Moreira de Freitas, (June 25-28, 2001, Lisboa, Portugal), (2001), pp. 967-974.
  9. *  板岡幹世、佐藤一志、橋田俊之、き裂要素を用いた混合モードき裂進展解析のための破壊判定法、計算数理工学論文集、Vol. 1 (2001年7月)、論文No. 01-070613, 67-70. Mikiyo Itaoka, Kazushi Sato, Toshiyuki Hashida, Failure Analysis Procedure for Mixed-Mode Crack Growth Using Embedded Crack Element, Transactions of the Japan Society for Computational Methods in Engineering, Volume 1, (2001), 67-70.
  10. *Lihui Liu, Toshiyuki Hashida, Satoshi Teramura, Application of a Mechanochemical Method for Recycling Waste Glass with CO2 Solidification, Proceedings of International Symposium of Young Scholars on Mechanics and Material Engineering for Science and Experiments (ISM2E-YS), Edited by Yichun Zhou, Yuanxian Gu, and Zhebg Li, (Changsha and Zhangjiajie, Hunan, P. R. China, August 11-16, 2001), 209-213.
  11. *Toshiyuki Hashida, Ayumu Shimizu, Toru Takahashi, and Koji Tanifuji, Development of Design Methodology for Deep-seated Geothermal Energy Extraction Systems, Proceedings of International Symposium of Young Scholars on Mechanics and Material Engineering for Science and Experiments (ISM2E-YS), Edited by Yichun Zhou, Yuanxian Gu, and Zhebg Li, (Changsha and Zhangjiajie, Hunan, P. R. China, August 11-16, 2001), 453-456.
  12. * Junguo Li, Takamasa Onoki, Lihui Liu, Atsushi Nkahira and Toshiyuki Hashida, Low Temperature Synthesis of Hydroxyapatite Ceramics from Octacalcium Phosphate by Hydrothermal Hot Pressing, Proceedings of International Symposium of Young Scholars on Mechanics and Material Engineering for Science and Experiments (ISM2E-YS), Edited by Yichun Zhou, Yuanxian Gu, and Zhebg Li, (Changsha and Zhangjiajie, Hunan, P. R. China, August 11-16, 2001), 214-217.
  13. * Y.C. Zhou and T. Hashida, Thermal Failure of Thermal Barrier Coating for Gas Turbine Blades by Laser Heating Method, Proceedings of International Symposium of Young Scholars on Mechanics and Material Engineering for Science and Experiments (ISM2E-YS), Edited by Yichun Zhou, Yuanxian Gu, and Zhebg Li, (Changsha and Zhangjiajie, Hunan, P. R. China, August 11-16, 2001), 396-399.
  14. *T. Hashida, G. Bignall, N. Tsuchiya, T. Takahashi, and K. Tanifuji, Fracture generation and water-rock interaction processes in supercritical Deep-Seated Geothermal Reservoirs, Geothermal Resources Council Transactions, Vol. 25, (2001), 225-229.　　(Geothermal Resources Council 2001 Annual Meeting, San Diego, August 26-29, 2001)
  15. *板岡幹世、佐藤一志、橋田俊之、大深部岩体における水圧破砕き裂進展挙動の数値シミュレーション法に関する研究、日本機械学会論文集(A 編),Vol. 67, No. 661 (2001), 119-126. Mikiyo Itaoka, Kazushi Sato and Toshiyuki Hashida, Study of Numerical Simulation Method for Hydraulically Induced Fracture Propagation in Deep-Seated Rock Mass, Transactions of the Japan Society of Mechanical Engineers, Vol. 67, No. 661 (2001), 119-126.
  16. * Junguo Li, Takamasa Onoki, Lihui Liu, Atsushi Nakahira nad Toshiyuki Hashida, Preparation and Mechanical Properties of Hydroxyapatite Ceramics by Hydrothermal Hot Pressing at Low Temperature, Proc. of Asian Pacific Conference on Fracture and Strength ’01 (APCFS’01) and International Conference on Advanced Technology in Experimental Mechanics ’01 (ATEM ’01) (October 20-22, 2001, Sendai International Center, Japan), (2001), 1068-1073.
  17. * Shin-ichi Komazaki, Maribel L. Saucedo-Munoz, Toru Takahashi, Toshiyuki Hashida and Tetsuo Shoji,　Small Punch Creep Behavior of Service-Exposed SUS316HTB Superheater Tubes of Fossil Boilers, Proc. of Asian Pacific Conference on Fracture and Strength ’01 (APCFS’01) and International Conference on Advanced Technology in Experimental Mechanics ’01 (ATEM ’01) (October 20-22, 2001, Sendai International Center, Japan), (2001), 316-321.
  18. * Yasushi Fujii, Koji Tanifuji, Catherine Stafford, Toru Takahashi, Toshiyuki Hashida, Crack Healing and Micro-crack Formation in Granite under the Presence of High Temperature and Pressurized Water, Proc. of Asian Pacific Conference on Fracture and Strength ’01 (APCFS’01) and International Conference on Advanced Technology in Experimental Mechanics ’01 (ATEM ’01) (October 20-22, 2001, Sendai International Center, Japan), (2001), 1041-1046.
  19. * Mikiyo Itaoka, Kazushi Sato and Toshiyuki Hashida, Numerical Analysis of Crack Growth Behavior Induced by Hydraulic Fracturing at Great Depth, Proc. of Asian Pacific Conference on Fracture and Strength ’01 (APCFS’01) and International Conference on Advanced Technology in Experimental Mechanics ’01 (ATEM ’01) (October 20-22, 2001, Sendai International Center, Japan), (2001), 523-528.
  20. * Akihide Saimoto, Yasufumi Imai and Toshiyuki Hashida, Simulation of Complexity in Failure Process of Rock under Biaxial Compression, Proc. of Asian Pacific Conference on Fracture and Strength ’01 (APCFS’01) and International Conference on Advanced Technology in Experimental Mechanics ’01 (ATEM ’01) (October 20-22, 2001, Sendai International Center, Japan), (2001), 551-556.
  21. * Takamasa Onoki, Kazuyuki Hosoi and Toshiyuki Hashida, Fracture Behavior of a Hydroxyapatite-Metal Interface Jointed by Hydrothermal Hot-pressing Method, Proc. of Asian Pacific Conference on Fracture and Strength ’01 (APCFS’01) and International Conference on Advanced Technology in Experimental Mechanics ’01 (ATEM ’01) (October 20-22, 2001, Sendai International Center, Japan), (2001), 511-516.
  22. * Toru TAKAHASHI, Kenji HASHIMOTO, Koji TANIFUJI and Toshiyuki HASHIDA, Permeability Enhancement by Microfracturing in Granite under Supercritical Water Conditions, Proc. of Asian Pacific Conference on Fracture and Strength ’01 (APCFS’01) and International Conference on Advanced Technology in Experimental Mechanics ’01 (ATEM ’01) (October 20-22, 2001, Sendai International Center, Japan), (2001), 547-550.
  23. * Ayumu Shimizu, Sergei Fomin, Kimio Watanabe and Toshiyuki Hashida, Numerical Simulation of the Hijiori Geothermal Reservoir Hydraulic Stimulation, Proc. of Asian Pacific Conference on Fracture and Strength ’01 (APCFS’01) and International Conference on Advanced Technology in Experimental Mechanics ’01 (ATEM ’01) (October 20-22, 2001, Sendai International Center, Japan), (2001), 540-546.
  24. * Tetsuro Tonomori, Akira Yoshida, Yichun Zhou, Lihui Liu and Toshiyuki Hashida, Fracture Characteristic of Plasma-Sprayed Thermal Barrier Coating in Tension and Bending Test, Proc. of Asian Pacific Conference on Fracture and Strength ’01 (APCFS’01) and International Conference on Advanced Technology in Experimental Mechanics ’01 (ATEM ’01) (October 20-22, 2001, Sendai International Center, Japan), (2001), 1057-1062.
  25. * Kazushi Sato, Akihide Saimoto, Toshiyuki Hashida and Yasufumi Imai, Crack Growth of Non-Coplanar Parallel Crack Array and Tension-Softening Model, Proc. of Asian Pacific Conference on Fracture and Strength ’01 (APCFS’01) and International Conference on Advanced Technology in Experimental Mechanics ’01 (ATEM ’01) (October 20-22, 2001, Sendai International Center, Japan), (2001), 157-161.
  26. * Y.C. Zhou and T. Hashida, Failure Characteristics of Thermal Barrier Ceramic Coating at High Temperature, Proc. of Asian Pacific Conference on Fracture and Strength ’01 (APCFS’01) and International Conference on Advanced Technology in Experimental Mechanics ’01 (ATEM ’01) (October 20-22, 2001, Sendai International Center, Japan), (2001), 292-296.
  27. * Y.C. Zhou, Z.Y. Yang, X.J. Zheng, T. Hashida, and J.Y. Li, Residual Stress in PZT Thin Film Determined by Indentation Fracture Method, Proc. of Asian Pacific Conference on Fracture and Strength ’01 (APCFS’01) and International Conference on Advanced Technology in Experimental Mechanics ’01 (ATEM ’01) (October 20-22, 2001, Sendai International Center, Japan), (2001), 988-993.
  28. * Seung-Se Baek, Song-In Lee, I1-Hyun Kwon, Hyo-Sun Yu, Eui-Gyun Na, Jeong-Soo Ha, T. Hashida and Se-Hi Chung, New Technique Development of High Temperature Creep Evaluation by Small Punch-Creep Test, Proc. of Asian Pacific Conference on Fracture and Strength ’01 (APCFS’01) and International Conference on Advanced Technology in Experimental Mechanics ’01 (ATEM ’01) (October 20-22, 2001, Sendai International Center, Japan), (2001), 309-315.
  29. * L. Liu, Y. Suto, G. Bignall, N. Yamasaki and T. Hashida, Fundamental Research for CO2 Injection into Granite and Sandstone, in Experimental Hot Water Systems, Proceedings of the 23rd New Zealand Geothermal Workshop, Edited by S.F. Simmons, M.G.Dunstall and O.E. Morgan, (November 7-9, 2001, The University of Auckland, New Zealand), (2001), 21-26.
  30. * Toru Takahashi, Koji Tanifuji, Catherine Stafford and Toshiyuki Hashida, Fracture Generation in Artificial Geothermal Reservoirs Under Supercritical Water Conditions, Proceedings of the 23rd New Zealand Geothermal Workshop, Edited by S.F. Simmons, M.G.Dunstall and O.E. Morgan, (November 7-9, 2001, The University of Auckland, New Zealand), (2001), 63-67.
  31. * Lihui Liu, Jechang Ha, Toshiyuki Hashida, and Satoshi Teramura, Development of a CO2 Solidification Method for Recycling Autoclaved Lightweight Concrete Wastes, Journal of Materials Science Letters, Vol. 22, Issue 19, (Oct. 2001), 1791-1794.
  32. * Kazushi Sato, Mikio Itaoka and Toshiyuki Hashida, FEM Simulation of Mixed Mode Crack Propagation Induced by Hydraulic Fracturing, Proceedings of 10th International Conference on Fracture, (December 2-6, 2001, Honolulu), Edited by K. Ravi-Chandar et al., (2001), CD-ROM.
  33. * Y.C. Zhou and T. Hashida, Thermal Failure of Thermal Barrier Ceramic Coating, Proceedings of 10th International Conference on Fracture, (December 2-6, 2001, Honolulu), Edited by K. Ravi-Chandar et al., (2001), CD-ROM.
  34. * K. Sato, M. Itaoka, and T. Hashida, Numerical Simulation of Geothermal Reservoir Formation Induced by Hydraulic Fracturing at Great Depth, Proc. of Workshop on Potential Thermal Extraction From Deep-Seated Rock Masses, (October 25-26, 2001, Sendai, Japan), Research for the Future Program, The Japan Society for the Promotion of Science, (2001), pp. 21-26.
  35. K. Tanifuji, Y. Fujii, T. Takashima, T. Takahashi, C. Stafford, and T. Hashida, Microcrack Generation and Microcrack Healing Behaviour in Granite under Supercritical Water Conditions, Proc. of Workshop on Potential Thermal Extraction From Deep-Seated Rock Masses, (October 25-26, 2001, Sendai, Japan), Research for the Future Program, The Japan Society for the Promotion of Science, (2001), pp. 1-10.
  36. * Maribel L. Saucedo-Munoz, Shi Cheng Liu, Toshiyuki Hashida, Hideaki Takahashi and Hideo Nakjima, Correlationship Between JIc and Equivalent Fracture Strain Determined by Small-Punch Tests in JN1, JJ1 and JK2 Austenitic Stainless Steels, Cryogenics, Vol. 41 (2001), 713-719.
  37. *Toshiyuki Hashida, T. Takahashi, Kazushi Sato and Katsuto Nakatsuka, Fracture Mechanics Study on Formation Process of Artificial Geothermal Reservoirs under Supercritical Water Conditions, Proceedings of International Conference 4th HDR Forum, (Strasbourg, September 28-30, 1998), Edited by Roy Baria, Jorg Baumgartner, Andre Gerard and Reinhard Jung, (2001), pp. 419-425.
  38. * Z. Jing, J. Willis-Richards, K. Watanabe, and T. Hashida, A New 3-D Stochastic Model for HDR Geothermal Reservoir in Fractured Crystalline Rock, Proceedings of International Conference 4th HDR Forum, (Strasbourg, September 28-30, 1998), Edited by Roy Baria, Jorg Baumgartner, Andre Gerard and Reinhard Jung, (2001), pp. 323-330.
  39. * S.P. Narayan, Z. Yang, S.S. Rahman, Z. Jing, and T. Hashida, HDR Reservoir Development by Fluid Induced Shear dilation: A Numerical Study of the Cooper Basin Granitie Rock, Proceedings of International Conference 4th HDR Forum, (Strasbourg, September 28-30, 1998), Edited by Roy Baria, Jorg Baumgartner, Andre Gerard and Reinhard Jung, (2001), pp. 269-279.

2000

  1. *Toshiyuki Hashida, Kazuo Hayashi, Hiroaki Niitsuma, Koji Matsuki, Noriyoshi Tsuchiya and Katsuto Nakatsuka, Investigation of Heat Extraction from Supercritical Geothermal Reservoirs, Proc. of World Geothermal Congress 2000, (May 28-June 10, 2000, Kyushu-Tohoku, Japan), (2000), 3725-3730.
  2. *Kazushi Sato and Toshiyuki Hashida, Development of Numerical Simulation Code for Hydraulic Fracturing Using Embedded Crack Element, Proc. of World Geothermal Congress 2000, (May 28-June 10, 2000, Kyushu-Tohoku, Japan) , (2000), 3865-3870.
  3. *Kimio Watanabe, Yuichi Niibori and Toshiyuki Hashida, Numerical Study on Heat Extraction from Supercritical Geothermal　Reservoir, Proc. of World Geothermal Congress 2000, (May 28-June 10, 2000, Kyushu-Tohoku, Japan) , (2000), 3957-3961.
  4. * Yuko Suto, Yuki Yamasaki, Toshiyuki Hashida and Nakamichi Yamasaki, Effects of CO2 on Water/Rock Chemical Interactions in Geothermal Reservoir Environment, Proc. of World Geothermal Congress 2000, (May 28-June 10, 2000, Kyushu-Tohoku, Japan) , (2000), 3901-3906.
  5. *Greg Bignall, Nakamichi Yamasaki and Toshiyuki Hashida, Laboratory Simulation of Granite-Fluid Interactions up to Supercritical Conditions, Proc. of World Geothermal Congress 2000, (May 28-June 10, 2000, Kyushu-Tohoku, Japan) , (2000), 3671-3676.
  6. * Greg Bignall, Nakamichi Yamasaki and Toshiyuki Hashida, A Newly Developed Flow-Reactor Autoclave, with pH Measurement System, for Laboratory Simulation of Chemical Interaction Processes, Proc. of World Geothermal Congress 2000, (May 28-June 10, 2000, Kyushu-Tohoku, Japan) , (2000), 3665-3670.
  7. *Ayumu Shimizu, Toshiyuki Hashida, Kimio Watanabe, Jonathan Willis-Richards, New Development of 3-D Stochastic Model for Design of HDR/HWR Geothermal Reservoir System, Proc. of World Geothermal Congress 2000, (May 28-June 10, 2000, Kyushu-Tohoku, Japan) , (2000), 3877-3882.
  8. * Sin-ichi Komazaki, Toshiyuki Hashida and Testuo Shoji, and Koshi Suzuki, Development of Small Punch Tests for Creep Property Measurement of W Alloyed 9%Cr Ferritic Steels, Journal of Testing and Evaluation, Vol. 28, No. 4, (2000-7), 249-256.
  9. * Y. C. Zhou and T. Hashida, Combined Effects of Temperature Gradient and Oxidation on Thermal Barrier Coating Failure, Life Assessment of Hot Section Gas Turbine Components (Proceedings of a Conference Held at Heriot Watt University, Edinburgh, UK, 5-7 October 1999), Edited by R. Townsend, M. Winstone, M. Henderson, J.R. Nicholls, Alan Partridge, B. Nath, M. Wood and R. Viswanathan, Published by IOM Communications Ltd, (2000), pp. 155-172. (ISBN 1-86125-108-4)
  10. *Maribel L. Saucedo-Munoz, Takashi Matsushita, Toshiyuki Hashida, Tetsuo Shoji, and Hideaki Takahashi, Development of a Multiple Linear Regression Model to Estimate the Ductile-Brittle Transition Temperature of Ferritic Low-Alloy Steels Based on the Relationship Between Small Punch and Charpy V-Notch Tests, Journal of Testing and Evaluation, Vol. 28, No. 5 (2000), 352-358.
  11. * Z. Jing, J.Willis-Richards, K. Watanabe and T. Hashida, A Three-dimensional Stochastic Rock Mechanics Model of Engineered Geothermal Systems in Fractured Crystalline Rock, Journal of Geophysical Research, Vol. 105, No. B10, (2000-10), 23663-23679.
  12. *T. Hashida and K. Nakatsuka, Review of Progress toward the Development of Geothermal Reactor, Proceedings of Joint Sixth International Symposium on Hydrothermal Reactions and Fourth International Conference on Solvo-Thermal Reactions, Edited by K. Yanagisawa and Qi Feng, (July 25-28, 2000, Kochi, Japan), (2000), 268-273.
  13. *Z. Jing and T. Hashida and K. Watanabe, Numerical Modelling of Water/Rock Chemical Interaction in HDR/HWR Geothermal Reservoirs, Proceedings of Joint Sixth International Symposium on Hydrothermal Reactions and Fourth International Conference on Solvo-Thermal Reactions, Edited by K. Yanagisawa and Qi Feng, (July 25-28, 2000, Kochi, Japan), (2000), 290-293.
  14. *G. Bignall, N. Tsuchiya, N. Hirano,and T. Hashida, Water-Rock Interaction in a Flow-Through Experimental System, with Application to the Development of Deep-Seated Geothermal Resources, Proceedings of Joint Sixth International Symposium on Hydrothermal Reactions and Fourth International Conference on Solvo-Thermal Reactions, Edited by K. Yanagisawa and Qi Feng, (July 25-28, 2000, Kochi, Japan), (2000), 294-297.
  15. *K. Sato, Y. Ohtani, T. Hashida, T. Shoji and N. Yamasaki, Low-Temperature Solidifying Method of Fibrous Composite and Its Application, Proceedings of Joint Sixth International Symposium on Hydrothermal Reactions and Fourth International Conference on Solvo-Thermal Reactions, Edited by K. Yanagisawa and Qi Feng, (July 25-28, 2000, Kochi, Japan), (2000), 415-418.
  16. *Yuko Suto, Lihiu Liu, Toshiyuki Hashida and Nakamichi Yamasaki, Measurement of CO2 Solubility in Simulated Underground Water at Depth for the Carbon Dioxide Sequestration, Proceedings of Joint Sixth International Symposium on Hydrothermal Reactions and Fourth International Conference on Solvo-Thermal Reactions, Edited by K. Yanagisawa and Qi Feng, (July 25-28, 2000, Kochi, Japan), (2000), 309-312.
  17. *T. Onoki, K. Hosoi and T. Hashida, New Method for Bonding Hydroxyapatite and Metal by Hydrothermal Hot-pressing, Proceedings of Joint Sixth International Symposium on Hydrothermal Reactions and Fourth International Conference on Solvo-Thermal Reactions, Edited by K. Yanagisawa and Qi Feng, (July 25-28, 2000, Kochi, Japan), (2000), 549-552.
  18. *Y. Matsumoto, T. Kamakura, N. Yamasaki, T. Hashida, Waste Treatment Process by Solidifying Cementitious Materials Using Hydrothermal Hot-pressing, Proceedings of Joint Sixth International Symposium on Hydrothermal Reactions and Fourth International Conference on Solvo-Thermal Reactions, Edited by K. Yanagisawa and Qi Feng, (July 25-28, 2000, Kochi, Japan), (2000), 215-218.
  19. * Y. C. Zhou, T. Hashida, 2000, The thermal-mechanical coupled failure mechanism of thermal barrier ceramic coating, Mechanics 2000 (in Chinese), edited by Y. L. Bai and W. Yang, Meteorological Press, 600-601